JVC KS-FX385 manual Tuning in to a preset station

	Manual preset
ENGLISH
	You can preset up to 6 stations in each band
	(FM1, FM2, FM3, and AM) manually.
	Ex.: Storing FM station of 92.5 MHz into the
	preset number 1 of the FM1 band.
	1 Select the band (FM1 – 3, AM) you
	want to store stations into (in this
	example, FM1).
		FM1		FM2	FM3
				AM
	2 Tune in to a station (in this example,
	of 92.5 MHz).
			To tune in to stations of
			higher frequencies
	To tune in to stations of lower frequencies

3 Press and hold the number button (in this example, 1) for more than 2 seconds.

Preset number flashes for a while.

4 Repeat the above procedure to store other stations into other preset numbers.

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 7 and 8.

1 Select the band (FM1 – 3, AM).

FM1FM2 FM3

AM

2 Select the number (1 – 6) for the preset station you want.

8