Miscellaneous Operations
Reset Software
Password
Channel
To reset the software on the Intimidator™ Spot LED 350, do the following:
1.Press <MODE/ESC> repeatedly until rESt shows on the display.
2.Press <ENTER>. The product will reset all settings in the software to the default factory settings.
The Intimidator™ Spot LED 350 contains a
In order to access this mode, do the following:
1.Press and hold <MODE/ESC> for at least 10 seconds.
2.Use the <UP> and <DOWN> buttons to enter the password: 2323.
3.Press <ENTER>.
In this mode you have several options for adjustment.
Parameter | Programming Steps | Description |
Pan Adjust | P128 | Manually adjust the pan angle |
|
|
|
Tilt Adjust | t128 | Manually adjust the tilt angle |
|
|
|
Gobo Wheel Adjust | G128 | Manually adjust the gobo wheel |
|
|
|
Color Wheel Adjust | C128 | Manually adjust the color wheel |
|
|
|
Focus Adjust | F128 | Manually adjust the focus |
|
|
|
Prism Adjust | L000 | Manually adjust the prism |
|
|
|
Lamp Brightness Adjust | d000 | Manually adjust the starting |
|
| brightness of the lamp |
Page 18 of 26 | Intimidator™ Spot LED 350 User Manual (Rev. 02) |