12electrolux use
0.00 | programme to remind you that the water | ||||
reservoir must be emptied out. If this light | |||||
illuminates during a programme this means | |||||
| that the water reservoir is full. The buzzer | ||||
| sounds, the programme stops, the light of | ||||
Incorrect option selection | the Start/Pause button flashes. |
| |||
If you select an option that is not compatible | “Filter cleaning” light |
| |||
with the programme you have selected, | It comes on every 80 cycles to remind you | ||||
the display shows Err (error). | that the condenser must be cleaned. | ||||
| “Condenser cleaning” light |
| |||
| This light illuminates at the end of the | ||||
| programme to remind you that the | ||||
| filters must be cleaned. |
| |||
This code will reappear during the execution of | At the end of the programme | ||||
the programme if you press one of the option | |||||
All drying programmes end with a 10 | |||||
buttons or turn the programme selector. | |||||
minute cooling phase. |
| ||||
Alarm code |
| ||||
You may remove the laundry after this | |||||
In case of a functional anomaly, the display | |||||
phase. The lights | and | , and illu- | |||
shows an alarm code (e.g. E21). | |||||
minate. |
|
|
| ||
E.27 | The display shows a static zero. | ||||
If the laundry is not removed at the end | |||||
of the cycle, the dryer performs an anti- | |||||
| creasing phase (duration: 30 minutes | ||||
“Drying” | maximum). If you do not remove the | ||||
laundry, the dryer will stop automatically | |||||
This symbol appears on the dispay that | |||||
at the end of the | |||||
the appliance is in the drying phase. | Lights | and | remain lit and the | ||
“Cooling” |
| buzzer sounds for 2 minutes. |
If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Turn the programme selector dial to “O” to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty. The appli- ance is switched off.
Remove the laundry.
If you open and then close the door before turning the selector dial to “O” all the lights corresponding to the phases making up the performed programme come on.