22 electrolux something not working
Malfunction
Possible cause |
| Solution |
|
|
|
When pressing a button, the corresponding button flashes several times.
Drum light does not work
●Washing protection.
After the start of the program- me, the option can no longer be set.
●Programme selector in OFF position.
●Defective light bulb
●Turn the programme knob to OFF. Set the programme again
●Turn programme selector to LIGHT or to any programme
●Replace light bulb (see next section).
When a button is pressed, Err appears in the
Programme inactive,
Water reservoir full 
light illuminated.
Drying cycle ends shortly after programme starts. END
light illuminated.
Drying cycle lasts an unusually long time. Note:
After around 5 hours the drying cycle ends automatically (see „Drying cycle complete“)
●Washing protection. After the start of the programme, the
option can no longer be set.
●Condensate tank is full.
●Not enough washing loaded or washing loaded is too dry for selected programme.
●Lint filter clogged.
●Heat exchanger clogged with lint.
●DELICATE button pressed and load volume too big.
●Load volume too big.
●Laundry insufficiently predrained.
●Turn the programme knob to OFF. Set the programme again.
●Empty condensate tank, then start programme with 
button.
●Select time programme or higher drying level (e.g. EXTRA DRY instead of STRONG).
●Clean lint filter
●Clean heat exchanger.
●DELICATE is only suitable for use with loads of up to 3 kg!
●Reduce load volume.
●Laundry must be adequately