Installation Instructions

Read these instructions carefully before you install the machine. The installation should be carried out by a qualified person who is familiar with all local codes and ordinances for electrical connections. Incorrect installation may cause damage and/or injury. If the integrity of the machine is in doubt, do not use it. Call your dealer for qualified assistance.

The dryer can be installed in any room with a hard floor. Do not install it on carpeting with heavy pile.

There must be a ventilation outlet to the exterior for the exhaust duct.

WARNING!

This appliance should never be exhausted into a chimney, wall, ceiling, or concealed space of a building. Only a metal ventilation grill should be used.

To install the tumble dryer, follow the steps below:

1.Remove the outer wrapping and the polystyrene base.

2.Move the machine into place.

3.Adjust the levelling legs by lifting the front of the dryer slightly and adjusting the feet to the correct height. Be careful not to screw the feet down too far and do not use a screwdriver.

NOTE: A badly leveled machine may result in damage to the bearings and premature wear, so we recommend that you use a spirit level.

4.Connect the exhaust duct to the ventilation outlet (see below).

CONNECTING THE EXHAUST DUCT

You will need a UL-CSA-approved, 4-inch ridged metal exhaust duct.

NOTE: Excessive duct and too many bends can impede drying performance. We recommend that you cut off any excess exhaust duct and run the duct with as few bends as possible. Make any necessary bends as gentle as possible.

To connect the exhaust duct, follow the steps below:

1.Connect the exhaust duct to the coupling nut supplied with the dryer. (See illustration below.)

2.Turn the coupling (together with the duct) counterclockwise in the air discharge outlet on the back of the dryer.

3.Connect the other end of the exhaust duct to a ventilation exhaust fitting or to a discharge duct in the wall and secure with a clamp.

4.It is best if the duct does not sag.

5.After you push the dryer into place, make sure there aren’t any kinks in the duct.

NOTE: Maximum duct length of 15 feet, using two 90° elbows is allowed. Subtract 4 feet of duct for each additional elbow.

ENGLISH

EDV158 specifications

Eurotech Appliances has established a reputation for combining efficiency with cutting-edge design, and their latest offering, the EDV158, is a prime example of this commitment. The EDV158 is an advanced electric dryer that boasts a range of features designed to enhance user experience while ensuring optimal performance.

One of the key features of the Eurotech EDV158 is its high-capacity drum, which provides ample space for drying large loads of laundry efficiently. With a capacity of 8 kg, it accommodates everything from everyday garments to bulky items like towels and bedding. The advanced drum design ensures that clothes are evenly dried without excessive wrinkling, reducing the need for ironing.

Equipped with innovative drying technologies, the EDV158 employs a heat pump system that not only improves energy efficiency but also provides gentle drying. This method circulates warm air through the drum, allowing moisture to be extracted from fabrics without exposing them to high temperatures. As a result, it helps maintain the integrity of the garments while reducing overall energy consumption by up to 50% compared to traditional dryers.

The EDV158 also features multiple drying programs tailored to meet various fabric requirements. From delicate fabrics to heavy-duty towels, users can easily select the appropriate cycle with just a few simple commands. This versatility is complemented by the sensor drying technology included in the dryer, which monitors moisture levels and automatically adjusts drying time, ensuring that laundry is never overdried or underdried.

Another standout characteristic of the Eurotech EDV158 is its intuitive control panel. Equipped with a digital display, the control interface allows users to select preferred drying settings effortlessly. Additionally, the delayed start function enables users to plan drying sessions around their schedules, providing added flexibility.

The Eurotech EDV158 is also designed with user convenience in mind. Its compact size allows it to fit seamlessly into various laundry spaces, making it an excellent choice for apartments or homes with limited areas. Furthermore, the easy-to-clean filter and a self-cleaning condenser facilitate maintenance, ensuring that the dryer continues to operate efficiently over time.

In summary, the Eurotech Appliances EDV158 is more than just an electric dryer; it is a fusion of advanced technology, energy efficiency, and user-centric design. With its impressive capacity, innovative drying features, and ease of use, the EDV158 sets a new standard for modern laundry solutions, making it an essential addition to any home.