Estate Clothes Dryer warranty Static, Electricity

Page 17

PROBLEM

CHECK IF

Shrlnldng Items are overdried

Fabric type and quality is suitable for drying

Slow drying There is a large amount of moisture in the load to be dried

Cold rinse water is used

Room air temperature is below 45°F (7°C)

Dryer is exhausted according to

Installation Instructions

Lint screen is clogged

Exhaust duct or outside exhaust hood is clogged

Proper electrical supply is used

Static

Load

is overdried

electricity

 

 

 

Fabric

softener is used

Synthetics, synthetic blends, permanent press and knits are in load

CAUSES/SOLUTIONS

Remove items while there is still a trace of moisture. Some items should be removed while damp, then shaped and air dried.

Some knits are stretched during manufac- turing. Washing and drying returns them to the original size. This is normal. Check quality of garment before buying. Follow fabric care label directions carefully.

Some items hold more moisture than others (cottons more than polyester). They take longer to dry. Full loads take longer to dry than small loads of the same fabric.

A load rinsed in cold water will take slightly longer to dry than a warm one. Cold rinses, however, help save energy and reduce wrinkling more than warm rinses do.

Install dryer in a room where the air temperature is warmer than 45°F (7°C). Cold air increases drying time and may cause wrinkles not to be removed.

Install and exhaust your dryer according to the Installation Instructions provided.

Clean lint screen before or after each use.

Clean if needed.

Properly connect the dryer to a grounded electrical circuit that meets the electrical requirements stated in the Installation Instructions.

Remove items while there is still a trace of moisture.

Use a fabric softener and follow package directions carefully.

Synthetics, synthetic blends, permanent press and knits build up static electricity. Use a fabric softener and be careful not to overdry the load.

17

Image 17
Contents UseAmdCare Lr-l Thank you for buying an Estate@ appliance Your safety is important to usWhat to do if YOU Smell GAS Understanding SafetyUnderstanding your responsibilities Important Safety InstructionsKnowing Your Dryer’s Features Before starting your dryer Operating Your DryerStarting or stopping your Selecting a cycleFire Hazard Using the High Heat automatic cycleUsing the Timed high heat cycle Using the Damp Dry cycle Maintenance-every loadCleaning the lint screen Caring For Your DryerCleaning a clogged lint screen Maintenance-as neededCleaning the dryer interior Cleaning the dryer exteriorElectrical Shock Personal Injury Hazard Removing accumulated lintView B \\‘ri\BeltWarnlng, Before you dry Laundry TipsDrying tips SortingDrying special-care items Air/line DryingPlastic Rubber items Scatter RugsDiapers, baby clothes Elastic items Vacation care Using dryer fabric softenersSaving energy Greasy Solving laundering problemsSpots LintElectricity StaticBefore calling for assistance If You Need Assistance Or ServiceIf you are not satisfied with how the problem was solved If you need serviceWhen asking for help or service If you need assistanceEstate Dryer Warranty