Warning — to reduce the risk of fire, electric shock, or injury to person, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
OPERATING INSTRUCTIONS
1.Make sure Dryer is turned off. (Indicator light should be off).
2.Separate clothes into cottons, permanent press.
3.Load clothes of the selected type loosely into the drum. Do not load clothes more than 3/5th full.
4.Close the Dryer door. You will hear a click when it is correctly closed.
5.Turn the Dryer knob to the desired amount of minutes for drying. High Heat for Cottons and Less Heat for Perma Press clothing.
6.Review these steps and check all the settings on the control panel before starting the machine.
7.Press the Power button. The indicator light will come on and in a few seconds, you will hear the cycle begin.
8.When the Dryer has completed the cycle, the machine will stop automatically, although the indicator light will remain on until you manually press out the Power button.
Note:
You can open the door any time during the Dry cycle without waiting. Be aware if heat builds up.
STARTING THE DRYER
Starting your dryer in the right way is important for the quality of your dry, to help prevent future problems and enhance life expectancy of your appliance. Once you have loaded your dryer, always check that:
1)The door is closed correctly.
2)The plug is secured in the socket.
Choose the desired program
The program is selected according to the type of garments that need to be dried. To choose a dryer time, refer to the table on page 13, then:
1)Turn Dryer knob to the desired position.
2)If necessary, use ½ heat button.
3)Press the Power button.
At the end of the dry cycle...
Turn the dryer off by pressing Power button. You can now open the dryer door safely. After having removed the dried laundry, leave the door open to allow air circulation inside the drum. Remember that, in the event of a power failure, or should the dryer switch itself off, the program chosen will remain in memory.
13 | Tumble Dryer Owner’s Manual |