Ending the programme through cancelling

To start a new programme after the programme is over or to interrupt the programme, the childproof lock should be deactivated. To deactivate the childproof lock, press the same buttons for 3 sec.

COne of the LEDs on the program follow-up indicator starts flashing when

the child-proof lock is activated.

CChild-proof lock is deactivated when the machine is restarted by pressing the On/Off button.

The program which is selected first will keep on going even if the position of the programme selection button is changed. A new programme can be selected and started after “Programme cancel” is activated in order to change the drying programme.

To cancel any selected programme;

•Press “Start/Pause/Cancel” button for about a duration of 3 seconds. The “Filter cleaning” warning LEDs as well as the “0” warning LED on the programme follow-up indicator will light up at the end of this period for reminding purposes.

AAs the inside of the machine will be excessively hot when you cancel the programme while the machine is running, activate the freshen up program to cool it down.

End of programme

The “Filter cleaning” warning LEDs as well as the “0” warning LED on the programme follow-up indicator will light up at the end of the programme. The door can be opened and the machine becomes ready for a second cycle. Press the “On/Off” button to shut down the machine.

CA 2-hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme has come to an end.

CClean the filter after each drying (please see, Filter cleaning).