Beko DPY 7504 XB1 user manual Changing the programme after it has started, 22 / 32 EN

You may repeat laundry adding or removing process as many times as you desire during drying. However, this process will increase the programme time and energy consumption since the drying process will be interrupted repeatedly. Therefore, it is recommended to add laundry before the drying programme has started.

If you select a new programme by turning the Programme Selection knob while your machine is in Pause mode, then the current program is aborted and new programme information is displayed.

CAUTION: Do not touch the inner surface of the drum when adding or taking out laundry while a programme is running. Surfaces of the drum are hot.

Dryer / User Manual

Any laundry added after the drying process has started may cause the clothes that are already dried in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.

Child-proof Lock is deactivated when the machine is switched off and on with On/ Off/Cancel button.

Lock symbol will appear on the display when the Child-proof Lock is activated.

Operating the product 5.12 Child Lock

Machine is equipped with a Childproof Lock which prevents interfering with the current programme flow by pressing any button. All buttons except the On/Off/ Cancel button on the control panel are deactivated when the Child-proof Lock is active.

In order to activate the Childproof Lock, press Anti- creasing button for 3 seconds.

To start a new programme after the current programme is over or to interrupt the current programme, the Child-proof Lock should be deactivated. Press the same button for 3 seconds again to deactivate the Child- proofCLock.

C

When the Child-proof Lock is activated:

Display symbols will not change even if the position of Programme Selection knob is changed while the machine is running or in halt.

5.13Changing the programme after it has started

After the machine starts, you can change the selected programme and dry your laundry in a different programme.

1.If you want to select Extra Dry programme instead of Iron Dry programme, press and hold the Start / Pause button to stop the programme.

2.Select Extra Dry programme by turning the Programme Selection knob.

3.Press the Start/Pause button to start the program.

Adding / removing laundry in Pause mode

In order to add or take out laundry after the drying programme has started:

1.Press Start/Pause button to switch the machine to Pause mode. Drying process will stop.

2.While in Pause mode, open the loading door, add or

take out laundry and close the loading door. 3.Press the Start/Pause button to start the program.

C

C

C

22 / 32 EN