Electrical requirements, Fitting a different plug

4Electrical Connection

Make sure that you have an earthed power outlet socket rated at 13 amps (minimum).

Attention!

If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability.

For a permanent connection, a master switch with at least 3mm contact clearance and minumum 13 A rating must be used.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

A Warning

This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted.

Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

In order to avoid hazards, damaged supply cord should be replaced by the manufacturer, its service agent or similarly qualified people.

A Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol or coloured green and yellow or green.

2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3 Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Green and yellow

or green

	N	L
	Blue or black
		Brown or red

DP 8045 CW specifications

The Beko DP 8045 CW is a top-of-the-line heat pump tumble dryer that combines efficiency, versatility, and advanced technology to revolutionize the way you care for your laundry. This model reflects Beko's commitment to sustainability while providing the perfect blend of performance and convenience for modern households.

One of the standout features of the Beko DP 8045 CW is its energy efficiency. With an impressive A+++ energy rating, this dryer is designed to consume significantly less energy compared to traditional dryers, helping you save on utility bills while being kinder to the environment. The heat pump technology utilizes lower temperatures to dry clothes gently, preserving the quality and lifespan of fabrics.

Equipped with a substantial 8 kg capacity, the Beko DP 8045 CW is suitable for families or anyone with a sizable laundry load. This capacity allows you to dry more items in a single cycle, making it a practical choice for busy households. Moreover, the dryer features various programmable drying options tailored for different fabric types, ensuring optimal drying results without the risk of damage.

Another key innovation is the ProSense Technology, which automatically adjusts the drying time and energy consumption based on the load size. This intelligent system not only enhances drying efficiency but also prevents over-drying, protecting your garments and reducing wear and tear.

The Beko DP 8045 CW also boasts a range of drying programs, including delicate, wool, and sportswear settings. This versatility makes it easier to care for a diverse array of fabrics, while the Anti-Crease function minimizes wrinkles, reducing the need for ironing.

For user convenience, the dryer features a large, easy-to-use LED display that simplifies program selection and monitoring. The reversed drum action ensures an even distribution of clothes throughout the cycle, promoting efficient drying and reducing tangling.

Additionally, the Beko DP 8045 CW incorporates a self-cleaning condenser, which keeps the system clean and maintains optimal performance over time. This feature eliminates the hassle of manual cleaning and ensures effective moisture removal, further enhancing the efficiency of the dryer.

Overall, the Beko DP 8045 CW combines innovative technology with user-focused design features, making it a standout choice in today’s market. Its impressive functionalities cater to all your laundry needs, providing a reliable and energy-efficient solution for your home.