“Freshen up”:
-Illuminates when the programme ends.
C
Changing the programme after the programme has started
You can use this feature to dry your laundry in a different programme after your machine has started to run.
interrupt drying continuously, it will extend the programme duration and increase energy consumption. Therefore, it is recommended to add laundry before the drying programme has started.
CIf you select a new programme by turning the programme selection knob while your machine is in standby, then the current programme is cancelled and new programme information is displayed.
For example;
Press and hold the “Start/Pause/Cancel” button for about 3 seconds to “Cancel” the programme in order to select “Extra Dry” programme instead of “Iron Dry” programme. Select the “Extra Dry” programme by rotating the programme knob. Press “Start/Pause/Cancel” button to start the programme.
CIf you select a new programme by turning the programme selection knob while your machine is running, then the current programme is cancelled and new programme information is displayed.
Child-proof lock
There is a
In order to activate the
To start a new programme after the programme is over or to interrupt the programme, the
3 sec. again to deactivate the
Lock symbol will appear on the screen when the
Adding/removing laundry in standby mode
In order to add or take out laundry after the
1.Press the “Start/Pause/Cancel” button to switch the machine to “Pause” mode. Drying process will stop.
2.Open the door at Pause position and close it again after adding or taking out laundry.
3.Press “Start/Pause/Cancel” button to start the programme.
CAny laundry added after the drying process was started may cause the already dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the
drying process is over.
CLaundry may be added or taken out as much as desired during a drying process, but as this process will
19
C
When the
•Display icons will not change even if the position of programme selection knob is changed while the machine is running or in halt.
•If the
EN