JVC KD-SX939/SX930 manual Other Main Functions, Changing general settings PSM, Setting the clock

Page 17

OTHER MAIN FUNCTIONS

Changing general settings (PSM)

You can change the following settings for this unit by using the PSM (Preferred Setting Mode) control.

CLOCK H and CLOCK M: Adjusts the built-in clock (see below).

LEVEL: Changes the level indicator mode on the display (see page 18).

DIMMER: Selects the dimmer mode (see page 18).

AREA: Changes the FM/AM channel interval (see page 19).

BEEP: Turning on/off the key-touch tone (see page 19).

ENGLISH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

3, 5

2, 4

6

Setting the clock

After installation, set the built-in clock correctly.

1 Press SEL (Select) for more than 2 seconds. One of the PSM items appears on the display.

2 If “CLOCK H” does not appear, press SSM ¢ or SSM 4 until it appears.

Current setting appears.

3 Rotate the control dial to adjust the hour.

4 Press SSM ¢ or SSM 4 until “CLOCK M” appears.

5 Rotate the control dial to adjust the minute.

6 Press DISP to start clock.

17

Image 17
Contents Recepteur CD InstructionsIdentification and Certification labels PrecautionsImportant for Laser Products For U.S.A. only Information For U.S.AContents Adjust the volume Turn on the powerAdjust the sound as you want see pages 14 Basic OperationsListening to the radio Radio OperationsStart searching a station To tune in a particular frequency without searchingPress and hold both buttons for more than 3 seconds FM station automatic preset SSMStoring stations in memory Press and hold the button for more than 1 second Manual presetTune into a station of 88.3 MHz Select the number 1 6 for the preset station you want Tuning into a preset stationOther convenient tuner functions When an FM stereo broadcast is hard to receiveScanning broadcast stations Selecting FM reception soundPlaying a CD CD OperationsOpen the control panel Insert a disc into the loading slot Close the control panel by handTo fast forward or reverse the track Locating a track or a particular portion on a CDTo go to the next track or the previous track To go to a particular track directlyTo play back tracks at random Random Play Selecting CD playback modesTo play back tracks repeatedly Repeat Play To play back the beginning of each track Intro PlayProhibiting CD ejection Other convenient CD functionsTurning on/off the loudness function Sound AdjustmentsSelecting preset sound modes Select the item you want to adjust Adjusting the soundAdjust the level Indication To do RangeStoring your own sound adjustments Other Main Functions Changing general settings PSMSetting the clock To check the current clock time changing the display mode Changing the level indicator modeSelecting the dimmer mode Turning on or off the key-touch tone Changing the AM/FM channel intervalsSelect the proper cruise mode for your car Controlling the volume automaticallyIf Audio Cruise does not function correctly To adjust the volume increase rateHow to attach the control panel How to detach the control panelDetaching the control panel Unlock the control panelRemote Operations Installing the batteriesUsing the remote controller Select the CD automatic changer CD Changer OperationsPlaying CDs To go to a particular disc directly Mode RND indicator Plays at random CanceledMode RPT indicator Plays repeatedly Mode Indication Plays the beginnings 15 secondsHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingAM Tuner SpecificationsFM Tuner CD Receiver