Avanti D110-1 instruction manual

Wall Mounting Instructions

**It is recommended to complete the following procedure with at least 2 people **

									Tools Required
				Tools and parts						Drill & Drill Bit	1
				required for Plaster					Phillips Head Screw Driver		1
				and or Wood						Wood screws 2” long	4
				Installation
					Wall Mounting Kit Includes the following:
				Description					Wall Hanging Bracket		2
										Wall Hanging Hook	2
										Plastic Spacers	2
										Exhaust Pipe	4 (Pieces)
a)	Determine the position where you will be installing the mounting bracket.
	(This dryer is not designed to sit directly on top of your washing machine).
	(A minimum of 2 inches in required between the top of the dryer and the ceiling to allow easy
	installation and adequate space for exhaust).
	(If mounting above a washing machine, allow sufficient spacing to open the lid of the washer or
	breathing room in the case of a front loading washer).
b)	Affix the wall mounting bracket (included)
	securely to the wall (directly to the stud).
	(If a stud is not available, use a wooden slat
	between the studs to mount the bracket)
c)	Install the Wall Hanging Hooks as shown in
	illustration (Fig. 2).
d)	Install	the		exhaust	pipe	as	shown			in
	illustration (Fig. 3). (Installation							hardware
	included)
	• For a downward exhaust join the
	sections (1) pointing downward.
	• For an upward exhaust join the sections
	(1) pointing upward.
e)	Mount	the	dryer on		the	wall	bracket			as
	shown	in illustration (Fig. 4).
	** It is recommended that this step be done
	by two (2) or more persons **

6