Haier HDY-M40, HDY-M60 Wall Mounting Instructions, Tools required, Wall mounting kit includes：

WALL MOUNTING INSTRUCTIONS

The dryer can be mounted on the wall in the inverted position only by following these instructions. Invert the dryer so that the control panel is at the bottom (see figure 3) this allows easier access to the controls.

1.Determine the location of the dryer on the wall and mark the bracket position.

A minimum 50 mm is needed between the top of the dryer and the celling for ease of installation;

If mounting above a washing machine, allow sufficient room to open the lid of the washer.

Tools required:

For plaster/ Wooden wall

Drill&3mm Bit	1
Philips head screwdriver	1

Wall mounting kit includes：

	Plastic Spacers	2
Description	Wall hanging brackets	2
	Hanging hook	2
	Wood screws, 12gx50mm	4
	Screws for hanging hooks	6
	and plastic spacers.

2.Fix the wall hanging brackets to the wall securely (eg. into the stud).

If the studs are too far apart, fit a timber slat to the studs then mount the

brackets onto the slat. The distance between each is 553 mm as per diagram.

553 mm

Wood screw

9