Haier HDY-D60 manual Stacking installation

INSTALLATION INSTRUCTIONS

5. With assistance, mount dryer on wall brackets. See Fig.4.

Fig.4

6.A second control panel with inverted symbols is supplied. Peel the release paper from the back of inverted film then

place new control panel film on the surface so that the writing is the correct way around.

		60min
Start/Pause	100min	30min
	Normal	60min
	Heat Dry	Air Dry
		6kg Sensor Dryer
HDY-D60	Extra Dry	30min
		Off

Caution：

Plug must be accessble after installation.

Stacking installation

You can use a stacking kit (included as an accessory) if you want to mount your dryer on the top of a Haier front load washing machine, ensure the washer is the same width as the dryer.

1.Remove 4 screws among screws on the bottom panel (see fig.1), and install the stacking kit on the bottom panel (see fig.2).

4 Screws

stacking kit

Fig.1 Fig.2

11