Change the venting mode

INSTALLATION INSTRUCTIONS

2.Install the dryer with stacking kit on the top of the front load washing machine (Fig.3). Drill two holes on both sides of washer with 2.9mm diameter drill. Detailed drill postion as shown on the stacking kit. Make sure the included screws are used. Fix the stacking kit on the top cover of washing machine, as shown on Fig.4.

Dryer

Stacking kit

Washer

Fig.3	Fig.4

There are three venting options:

Front venting

The exhaust grill has a range of positions, which allows you to select the optimum exhaust air angle. Simply hold the grill and rotate it until you reach the desired position.

30min

Air Dry

60min

6kg Sensor Dryer

30min

Off

Extra Dry

	Heat Dry
Normal
100min	Start/Pause

60min

Note: If the dryer is mounted on the wall you must use the front venting option.