WALL MOUNTING INSTRUCTIONS
The dryer can be mounted on the wall in the inverted position only by following these instructions.
Invert the dryer so that the control panel is at the bottom (see figure 3) this allows easier access to the controls.
1.Determine the location of the dryer on the wall and mark the bracket position.
A minimum 50 mm is needed between the top of the dryer and the celling for ease of installation;
If mounting above a washing machine, allow sufficient room to open the lid of the washer.
Tools required
For plaster/ | Drill&3mm Bit | 1 |
Wooden wall | Philips head screwdriver | 1 |
|
|
|
Wall mounting kit includes
Description
Plastic Spacers | 2 |
Wall hanging brackets | 2 |
Hanging hook | 2 |
Wood screws, 12gx50mm | 4 |
Screws for hanging hooks | 6 |
and plastic spacers. |
|
2.Fix the wall hanging brackets to the wall securely (eg. into the stud).
If the studs are too far apart, fit a timber slat to the studs then mount the
brackets onto the slat. The distance between each is 553 mm as per diagram.
553 mm
Wood screw
9