OPERATING INSTRUCTIONS
1.Power up
Insert the power plug into an appropriate power outlet that is properly installed and grounded. Operating power supply:
2.Laundry loading
Open the door and load the laundry into the drum of the dryer. For a more energy efficient and better drying result, make sure the load has been spun dried. Try to loosen the load when placing in the dryer.
Note: Check labels on clothing before placing them in the dryer. Some articles are not suitable for machine dry. High temperature may damage the fabric.
May be tumble dry .
Do not tumble dry .
Normal dry .
Air dry, only .
3.Setting drying time
Turn the timer knob to set an optimal drying time according to the fabric type and quantity. You can choose cool cycle or warm cycle according to your needs and then press the “Start” button to start the dryer.
NOTE: 1. Before you set the drying time, ensure your hands are dry.
2.Please close the door and press the “Start” button to restart the machine after adding laundry during the cycle.
4.Program completion Warm air cycle:
Before the drying time comes to end, the dryer will add cold air to cool the clothes. After the timer stops, the knob will point to OFF.
Open the door to remove the laundry.
Cool air cycle:
Throughout the cycle, the heater does not activate. The laundry is dried by cool air. Note: 1.To avoid timer interruption, please do not turn the timer knob to the gray area
of the program cycle.
2.Clothes should go through the cooling down/airing phase of the cycle.
If for any reason the dryer is stopped before the cycle has fininshed, dry clothes should be removed immediately and not left in the dryer. Clothes should be spread out to cool and not left bunched eg.in a clothes basket. Before you open the door, please switch off the power supply.
5.Cleaning the filter
Please clean the filter after each load.
5