Specifications

Printing Method:

Thermal Direct

Dots Per Line:

576 (203 dpi)

Printing Width:

70mm

Resolution:

8 dots/mm

Printing Speed:

Up to 2 ips

Head Temperature Detection:

By thermistor, hardware protection

Paper-Out/TOF Detection:

against overheating

By photo interruptor

Current Consumption:

3.8A at 64 dots

Standard Operating Features

Character Set:

ASCII International, IBM Graphic, and 1

Graphic Print:

downloadable set

Bit addressable graphic command set: Bar

 

codes 39, 128, 2 of 5, UPC, Graphic logo

Supervised Operation:

store and print

Supervisory command set to read battery

 

voltage, buffer status, power management

Line Buffering:

and data transfer

32k standard

Print Contrast:

Auto and user selectable

Print Output:

Double high, double wide and bold print

Communication

Interface:

Standard - Serial RS-232 with modular

 

connector (6 pin), Infra-Red (IrDA) up to

 

38.4K transmission speed with ambient

 

light filter or Bluetooth. Optional – Magnetic

 

Card Reader (3 track, simultaneous read);

 

Smart Card Reader

Baud Rate:

2400, 4800, 9600, 19,200, 38,400 baud,

Fast IrDA Transfer Speed:

dip switch set

Up to 38.4K depending on computer

Std. IrDA Transfer Speed:

compatibility

9600 connect and transfer

Handshaking:

CTS/RTS and or XON/XOFF; MS-DOS and

 

Windows compatible with full-speed

 

handshake; Windows 95®, 98®, Xp and

 

2000 printer drivers; Windows CE print

 

application; Windows CE and Pocket CE

 

print driver from fieldsoftware.com;Palm

 

O/S print driver from Bachmann Software

 

or stevenscreek.com

Power

Power:

Internal rechargeable battery and wall

Battery:

mount DC power pack

5 cell NiMH 1500 mAH rechargeable

DC Power Pack:

9vdc/1.4A

Battery Recharge:

Internal 90 minute fast charge with

auto switch to trickle charge; Over current and overheat protection

Power ON/OFF: Via switch or by raising RTS (ON) or lowering RTS (OFF); Auto power switch down timer

User Interface

Status Indicators: 3 LEDs

User Switches: 2 membrane switches Power ON/ OFF, Feed

Connection: Modular (6 pin) for Data I/O; DC input

 

Power Jack for wall mount adapter;

 

Infra- Red (IrDA) with Ambient Light

 

Filter, or Bluetooth.

Mechanical

 

Dimensions:

121x152x57mm (4.75x6x2.5”) WxLxH

Weight:

580g (20oz) with paper and battery

Warranty:

pack

1 year printer; 6 months or 1 million

 

inches on printhead; batteries, 90

 

days

Environmental

Specifications

Operating

 

Temperature:

-10° to 50°C

Storage

 

Temperature:

-20° to 60°C

Humidity:

Up to 85% RH (noncondensing)

Drop Test:

4 feet

Agency Approvals: FCC Part 15J Part B; CE

Print Media

EN55022 Part B, EN50082-1

 

Paper Width:

80mm (3.125”)

Lines of Print/Roll:

4400 (1.4" diameter roll, 0.4" core,

Paper Rolls Per

approx. 45 feet long

 

Charge:

~6

Specifications subject to change without notice

Paxar Americas, Inc.

800.543.6650

prompt 5

 

170 Monarch Lane

937.865.2554

fax

 

Miamisburg, OH 45342

e-mail: dmail@paxar.com

 

 

www.paxar.com

©2004 Paxar Americas, Inc.

 

 

 

MON-BR-0029

All Rights Reserved

Page 2
Image 2
Monarch 3R 9430 Standard Operating Features, Communication, Power, User Interface, Mechanical, Specifications, Print Media