Heatcraft Refrigeration Products 2500018 System Warranty, In-Warranty Return Material Procedure

Page 11

Remote Air-Cooled Condenser

System Warranty

This equipment is designed to operate properly and produce rated capacity when installed in accordance with accepted industry standards.

Failure to meet the following conditions may result in voiding of the system warranty:

1.System piping must be installed following industry standards for good piping practices.

. Inert gas must be charged into piping during welding.

3.System must be thoroughly leak-checked and evacuated before initial charging. High vacuum gauge capable of reading microns is mandatory. Dial indicating pressure gauges are not acceptable.

4.All controls and safety switch circuits properly connected per wiring diagram.

5.Factory-installed wiring must not be changed without written factory approval.

6.Power supply to the system must meet the following conditions:

a.Voltage for 208/230 motors not less than 185 volts or more than 253 volts. For 460 motor, not less than 414 or greater than 506.

b.All other voltages must not exceed ±10 percent of nameplate ratings.

c.Phase imbalance not to exceed 2 percent.

In-Warranty Return Material Procedure

Material may not be returned except by permission of authorized factory service personnel of Heatcraft Refrigeration Products LLC in Stone Mountain, Georgia, USA. A Return Goods tag will be sent to be included with the returned material. Enter the information as called for on the tag in order to expedite handling at our factories and prompt issuance of credits. All parts shall be returned to the factory designated on the Return Goods tag, transportation charges prepaid.

The return of a part does not constitute an order for replacement. Therefore, a purchase order must be entered through your nearest Heatcraft Refrigeration Products representative. The order should include part number, model number and serial number of the unit.

Remote Air-Cooled Condenser Installation and Operations Manual, August 2007

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation and Operations Manual Unit Location Installation RequirementsInspection Rigging and Moving UnitsSpace and Location Requirements Remote Air-Cooled Condenser2500018 Vertical CondenserHorizontal Condenser Typical Piping Arrangements Installation, Refrigerant PipingTons of Refrigeration, Drain Electrical WiringCondensing Temperature Correction Factor Tons of Refrigeration, DischargeT1 T2 Operation Start UpFlooded Head Pressure Control Valve FHP MaintenanceCleaning Instructions Refrigerant Charge, R-22 lbs FHP Charge Factor T.D and 30 ˚FIn-Warranty Return Material Procedure System WarrantyGeneral Fan Layouts Condenser SpecificationsSpecifications Diagram 6. Dimensions for Models 008-01637 1/2 Quantity 230/1/60 230/460/3/60 Replacement Parts byReplacement Parts List Model Motors FanInstallation Checklist Climate Control

2500018 specifications

Heatcraft Refrigeration Products has established itself as a leader in the refrigeration industry, offering innovative solutions designed to meet the diverse needs of commercial and industrial applications. One of their notable offerings is the Heatcraft Refrigeration Products 2500018, a high-performance refrigeration unit that combines reliability, efficiency, and advanced technology.

The Heatcraft Refrigeration Products 2500018 is specifically engineered for various cooling applications, making it suitable for a wide range of setups, including foodservice establishments, cold storage facilities, and supermarkets. Its robust construction ensures durability, which is crucial for environments that require constant refrigeration.

One of the main features of the 2500018 is its energy efficiency. Designed to minimize energy consumption while maximizing cooling performance, this model adheres to the latest industry standards for energy efficiency. This is particularly important for businesses seeking to reduce operational costs and improve their environmental footprint. The unit employs advanced insulation technology, ensuring minimal energy loss and maintaining optimal temperatures inside.

The 2500018 incorporates cutting-edge technology that enhances its functionality. It features a user-friendly digital controller that allows for precise temperature management, enabling operators to set and monitor conditions with ease. Additionally, the system includes various safety mechanisms, such as pressure controls and temperature alarms, which provide peace of mind by preventing operational failures and ensuring the safety of stored products.

Another significant characteristic of the Heatcraft 2500018 is its versatility. The unit can be tailored to meet specific application requirements, thanks to its customizable options. This adaptability makes it a preferred choice among business owners who need reliable refrigeration solutions that fit their unique operational needs.

Moreover, the sleek design and compact size of the 2500018 make it an excellent choice for space-constrained environments. Its installation is straightforward, and it’s designed for easy maintenance, allowing technicians to perform service tasks efficiently.

In summary, the Heatcraft Refrigeration Products 2500018 stands out as an exceptional refrigeration solution due to its energy efficiency, advanced technology, versatility, and ease of maintenance. With a commitment to quality and innovation, Heatcraft continues to set the industry standard, addressing the ever-evolving demands of commercial refrigeration. Businesses that invest in the 2500018 can expect uncompromised performance and reliability, ensuring their refrigeration needs are met effectively.
Top Page Image Contents