InterMetro Ind FL199, C199 user manual Table of Contents

TABLE OF CONTENTS

SECTION		PAGE
I. Introduction
A.	Identifying Your Cabinet	1
B.	Features	2
II. Operating Instructions
A.	Reversible Doors	2
B.	Slide Rack Assemblies	2
C1. HM2000 Holding Module		3
C2. FL2000 High Humidity Holding		4

III.Food Holding Guidelines

A. HM2000/HM15LW Recommended

	Food Holding Guidelines	5 & 6
IV. Cleaning Instructions
A.	Specific Cleaning Instructions	7
B.	General Cleaning Instructions	7
V. Maintenance
A. Cabinet Maintenance		7
B. Module Maintenance		7
C. Blower Motor Maintenance		7
VI. Relacement Parts, Procedures and
Wiring Diagrams
A.	Cabinet	8 & 9
B.	Modules	10
	HM2000
	Module Replacement Parts Diagram	11
	Wiring Schematic	12
	FL2000
	Module Replacement Parts Diagram	13
	Wiring Schematic	14

I.INTRODUCTION

A.IDENTIFYING YOUR CABINET

Your cabinet assembly has been shipped in two cartons. The first carton contains the cabinet with module. The other carton contains the slide racks.

There are several component numbers which you may want to record for future reference: the cabinet model number, the module model number along with the module serial number and the slide rack model number. Refer to the photo at right to locate these numbers. The slide rack model number is located on the label affixed to the ends of the rack carton. It is recommended that all numbers be recorded in an appropriate place, such as at the bottom of this page. AIso, please record the cabinet model number and module serial number on the Warranty Card found at the back of this manual. Be sure to complete the remainder of the Warranty Card and return it to Metro within fifteen (15) days of delivery of the cabinet. Once you have located and recorded these numbers, refer to the sample numbers given on this page to identify the components of your 199 series cabinet.

Cabinet Model No. ________________________

Module Model No. _________________________

Module Serial No. _________________________

Slide Rack Model No. ______________________

SAMPLE OF CABINET LABELING

C199-HM2000 = Full Height, Holding

C199T-HM2000 = 3/4 Height, Holding

OR

FL199-HM2000 = Full Height, High Humidity Holding FL199H-HM2000 = 1/2 Height, High Humidity Holding

	SAMPLE OF SLIDE RACK
	CARTON LABELING
C4SC	= Full Height
C4SC-T	= 3/4	Height
C4SC-H = 1/2		Height

Indicates Slide Spacing C4SC/-T/-H = Wire 3" Spacing

C8SN/-T/-H = Aluminum Fixed on 11/2" Spacing CVSN/-T/-H = Aluminum Adjustable

▼	LOCATION
	OF CABINET
	MODEL
	NUMBER

LOCATION OF

MODULE MODEL

NUMBER AND

SERIAL NUMBER

FL199-HM2000	▼
Full Height Unit Shown

NOTE: Please read this manual thoroughly before using your cabinet. If you should have questions, please contact Metro customer service department.

1