AEG T3 Before the first drying cycle, Programme selector as phase indicator

Page 12

Structure of the appliance

Programme selector

•Time setting 120 MIN - 20 MIN: to select the required drying time, in minutes, for cottons.

120

100

0

20

40

• Time setting	80 MIN - 20 MIN: to select	80
• Time setting	80 MIN - 20 MIN: to select
the required	drying time, in minutes, for	60
synthetics.

40

• COOLING Position : to smooth out creased garments with a cold air flow;

slightly moisten the creased areas beforehand; duration:

60 80

0 20

8 minutes.

•OFF Position O: in this position the dryer is switched off, the control light is not on.

Programme selector as phase indicator

The programme selector acts as an indicator of the cycle phases, by turning clockwise until the end of the programme is reached.

Before the first drying cycle

Wipe the drum of the dryer with a damp cloth before performing the first drying cycle.

33

Image 12

Contents Lavatherm T3 Dear customer Contents Safety instructions General safetyChild safety Positioning and connection General instructions Proper useDiscarding Packaging materialsAppliance Tips for environmental protection SpinningMost important features of your appliance EnergyMinutes Structure of the appliance Front viewRear view Control panel C DProgramme selector as phase indicator Before the first drying cycleProgramme selector Brief operating instructions Drying Sort out the laundryOpen the door Load the laundrySwitch the tumble dryer off Clean the filterRemove or add laundry End of drying cycleProgramme charts For laundry spun at 1000 revolutions per minuteFor laundry spun at 650 revolutions per minute For laundry spun at 1200 revolutions per minuteCare symbols If none of these symbols is foundBrief summary of fabric information Cleaning and care Cleaning the doorCleaning the drum Cleaning the panel and the controlsProblem Something not working?Possible cause Technical specifications Special accessoryElectrical connection Kit Washing/drying columnService