AEG T3 Remove or add laundry, End of drying cycle, Switch the tumble dryer off, Clean the filter

Page 15

Drying

Remove or add laundry

It is possible to interrupt the drying cycle at any time in order to remove or add laundry.

Open the door.

Caution! Laundry and drum can be hot.

Remove or add laundry.

Close the door to continue the drying cycle.

End of drying cycle

A cooling phase is performed before the end of the drying cycle: the heat is cut off during this phase. After the cooling phase, it is possible to remove the laundry from the dryer.

Open the door and remove the laundry.

Switch the tumble dryer off

Pull out the plug.

Clean the filter

To ensure free circulation of air during the drying cycle, the fluff filter must be cleaned after each drying cycle, before removing the laundry. Use a damp cloth to do this.

The fluff filter cannot be removed.

Image 15

Contents Lavatherm T3 Dear customer Contents Safety instructions General safetyChild safety Positioning and connection Proper use General instructionsDiscarding Packaging materialsAppliance Spinning Tips for environmental protectionMost important features of your appliance EnergyMinutes Structure of the appliance Front viewRear view C D Control panelProgramme selector as phase indicator Before the first drying cycleProgramme selector Brief operating instructions Load the laundry DryingSort out the laundry Open the doorEnd of drying cycle Switch the tumble dryer offClean the filter Remove or add laundryFor laundry spun at 1200 revolutions per minute Programme chartsFor laundry spun at 1000 revolutions per minute For laundry spun at 650 revolutions per minuteCare symbols If none of these symbols is foundBrief summary of fabric information Cleaning the panel and the controls Cleaning and careCleaning the door Cleaning the drumProblem Something not working?Possible cause Kit Washing/drying column Technical specificationsSpecial accessory Electrical connectionService