www.GEAppliances.com
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
Safety
How to Delay the Start of Cleaning
Touch the SELF CLEAN pad.
Using the + or – pad, enter the desired clean time.
Touch the DELAY START pad.
Using the + or – pad, enter the time of day you want the clean cycle to start.
Touch the START pad.
The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off.
When the LOCKED light is off, open the door.
Instructions Operating Instructions Care
After a Clean Cycle
and
You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a
These deposits are usually a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
■You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
■If the shelves become hard to slide, wipe the shelf supports with cooking oil.
Cleaning Troubleshooting Tips Consumer Support
17
