AEG 88840 Starting the ProSteam programme, Changing a programme, Starts, Ceding drying programme

Page 19

ProSteam system 19

1.Select the programme and additional functions/options if necessary.

2.Press the DELAY button as many times as necessary.

During selection, END TIME of the cycle increases in the display and delay icon is on.

If you reach 20 hours of start delay and you press the button again, the time delay is cancelled and delay icon disappears.

3.To activate the delay timer, press the START PAUSE button. The amount of time re- maining until the programme is set to start is continuously displayed (e.g. 5:00 hours, 4:59… 0:30 minutes etc).

The message Delay Start and delay icon is on.

Starting the ProSteam programme

Press the START PAUSE button. The programme

 

 

 

 

 

starts.

 

 

 

 

COTTON SHIRTS

0:21

 

The progress bar and the name of currently per-

 

Press START to run

13:22

 

formed phase, above it, show stage of the cycle.

 

programme.

 

 

 

 

MED

---

---

 

With wet laundry, after a few minutes the appli-

 

 

ance will show the correct programme duration

 

 

 

 

 

 

 

 

 

 

for the ProSteam programme including the pre-

 

 

 

 

ceding drying programme.

As soon as the right level of dryness is reached, the ProSteam programme will start auto- matically. Alternately Steam Treatment and Steam Injection phases names are displayed.

During the steam phases that form part of the ProSteam programme and also the anti-crease phase the loading door cannot be opened.

Risk of burns!

If the steam water tank is empty when you select a ProSteam programme the following message will appear on the display (see picture). The pro- gramme cannot be started. You will need to fill the water tank first (see chapter ProSteam sys- tem- section Filling steam water tank)

The steam water tank is empty. Please fill

it and then press START.

It is normal for the appliance to make noises during a ProSteam or drying programme if garments with hard parts, such as metal buttons, are put in the drum.

Changing a programme

To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF and then reset the programme.

The programme can no longer be changed directly once the programme has started. If you nevertheless attempt to change the programme with the programme knob the following message is shown:

Please turn programme selector to the last used position.

The drying programme is not however affected by this.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents ProSteam condenser DryerContents Operating Instructions Important safety informationUse InstallationEnvironment Child safetyPackaging material Environmental tipsProduct description Display Control panelControl panel First start-up Switching machine on / switching light onSetting the language First start-upBefore first use Setting the timeTo confirm the choice press the OK button again Special notes about ProSteam Sorting and preparing laundrySorting laundry Preparing laundryFill steam water tank Laundry weightsProSteam system Opening loading door / loading laundryAny ProSteam programme Water recirculation systemPage Easy Care Cotton ShirtsSynthetic Shirts CottonsCottons MED MINMED MAXSelect Steam Level Selecting the programmeSelecting additional options Long Anticrease Setting Delay functionCeding drying programme Starting the ProSteam programmeChanging a programme StartsProSteam programme complete / removing laundry Drying programmes overview DryingDrying Rack Setting DrynessOption Delicate and Sensitive cannot be selected together SilkBy turning the knob choose a drying programme When the option is active, the Sensitive icon is onDisplay, e.g for a programme of 20 minutes Selecting Delay StartSelecting Time Starting the drying programmeDrying programme complete / removing laundry Drying rackOpen the loading door Insert the rack Cleaning fluff filter Care and cleaningAfter cleaning do not forget to put it back Clean the entire filter area Emptying the condensate tank Cleaning the door sealCare and cleaning Cleaning heat exchangerTurn both lock washers inwards Cleaning the drum Cleaning the water recirculation valve/filterWhat to do if Clean operating screen and housingTroubleshooting by yourself What to do ifGramme chart chapter Complete Changing the bulb for interior lightingSettings Water Hardness 93/68/EEC dated 22.07.1993 CE Marking Directive Technical dataTechnical data Hints for test institutesAppliance positioning InstallationAppliance must be moved in vertical position for transport Installation Removing transport safety packagingDrying rack unpacking Terminal «N» or coloured black Or by the earth symbol Or coloured green YellowElectrical connection For easiest unpacking turn the rack upside downSpecial accessories ServiceDoor reversal Standard guarantee conditions GB IE Guarantee/Customer Service0870 5 929 Tel European GuaranteeAlbania +35 Luxembourg Page Page 136905540-01-25072008
Related manuals
Manual 64 pages 17.28 Kb

88840 specifications

The AEG 88840 is a highly regarded appliance that brings cutting-edge technology and design into the modern kitchen. As a sophisticated built-in coffee machine, it is tailored for coffee enthusiasts who demand quality and convenience right at their fingertips.

One of the main features of the AEG 88840 is its ability to prepare a wide range of coffee beverages, from an intense espresso to a creamy cappuccino. The machine's integrated grinder utilizes conical burr technology, which minimizes heat during the grinding process, preserving the coffee beans' aromatic oils and flavors. This results in a consistently rich and flavorful espresso shot every time.

The AEG 88840 also boasts an intuitive touchscreen display, allowing users to easily navigate through a multitude of options. This digital interface is user-friendly and provides customizable settings for strength, temperature, and volume, ensuring that each cup can be tailored to individual preferences. Users can save their personal profiles, making it simple to retrieve their favorite recipes at the touch of a button.

Another significant feature of this model is its one-touch functionality, enabling users to brew a variety of coffee drinks without complicated processes. The machine is equipped with an automatic milk frother, which creates velvety microfoam for lattes and cappuccinos. This feature not only enhances the drink's texture but also makes it suitable for those who appreciate barista-level results from the comfort of their home.

In terms of maintenance, the AEG 88840 is designed with ease of cleaning in mind. It includes an automatic cleaning program that takes care of the essential upkeep, allowing users to focus solely on enjoying their coffee rather than worrying about the machine's maintenance.

The build quality of the AEG 88840 reflects AEG's commitment to premium materials and robust design. Its sleek, modern styling complements various kitchen decors, making it an aesthetically pleasing addition to any space. Additionally, its compact size ensures it can fit seamlessly into standard kitchen cabinetry.

With features such as Wi-Fi connectivity, the AEG 88840 can be controlled remotely via a smartphone app, making it possible to brew a fresh cup of coffee at any time, even if you’re not in the kitchen. This innovative approach to coffee brewing highlights the blend of convenience and technology that defines the AEG 88840.

Overall, the AEG 88840 encompasses a range of features, technologies, and characteristics that make it a premier choice for coffee lovers looking for an exceptional brewing experience at home.
Top Page Image Contents