AEG 88840 user manual By turning the knob choose a drying programme

Page 23

Drying 23

CAUTION!

Make sure that by selecting the DRYNESS function, you do not over-dry your wool or silk.

Selecting additional options

The additional options available for the drying programmes are DELICATE, SENSITIVE, LONG ANTICREASE, BUZZER, SPIN SPEED2) and the CHILD LOCK.

1.By turning the knob choose a drying programme.

2.To set the option press OPTION button. You will see available options on the screen.

3.Press repeatedly OPTION button to select proper option. Selection is marked by rec- tangular border.

4.Press OK button to activate it. Suitable icon should appear on the right side of the screen.

To deselect an option follow the same steps. Option icon should disappear.

DELICATE

For especially gentle drying of sensitive fabrics with the care label: and for temperature- sensitive textiles (e.g. acrylic, viscose). Programme is executed with reduced heat. DELICATE is only suitable for use with loads of up to 3kg.

When the option is active, the DELICATE icon is on.

SENSITIVE

For gentle drying of fabrics that are frequently worn. Programme starts on full heat setting, which is then reduced as the programme progresses to be kind to the washing.

When the option is active, the SENSITIVE icon is on.

LONG ANTICREASE

A 90 minute anti-crease phase is set. The display now shows the long anti-crease icon. If this additional option is selected, the anti-crease phase (30 min.) at the end of the drying cycle is lengthened by 60 minutes. The laundry can be removed at any time during the anti- crease phase.

BUZZER

The appliance is supplied with the BUZZER function deactivated. The button is used to switch the function on or off. When the function is active, the BUZZER symbol appears in the display.

The buzzer sounds or plays a tune during:

cycle end

anti-crease phase and when phase starts or ends

cycle interruption by a warning

alarm

CHILD LOCK

The child lock can be set to prevent a programme being accidentally started or a programme in operation being accidentally changed. The child safety device locks all buttons and the programme knob. The child safety device can be deactivated by holding down the OPTION and OK buttons simultaneously for 5 seconds.

2) available with cotton/easy care and cotton/synthetic shirts programmes

Image 23
Contents ProSteam condenser DryerContents Operating Instructions Important safety informationUse InstallationEnvironment Child safetyPackaging material Environmental tipsProduct description Control panel Control panelDisplay First start-up Switching machine on / switching light onSetting the language First start-upTo confirm the choice press the OK button again Setting the timeBefore first use Special notes about ProSteam Sorting and preparing laundrySorting laundry Preparing laundryFill steam water tank Laundry weightsProSteam system Opening loading door / loading laundryAny ProSteam programme Water recirculation systemPage Easy Care Cotton ShirtsSynthetic Shirts CottonsCottons MED MINMED MAXSelecting additional options Selecting the programmeSelect Steam Level Long Anticrease Setting Delay functionCeding drying programme Starting the ProSteam programmeChanging a programme Starts ProSteam programme complete / removing laundry Drying DryingDrying programmes overview Rack Setting DrynessOption Delicate and Sensitive cannot be selected together SilkBy turning the knob choose a drying programme When the option is active, the Sensitive icon is onDisplay, e.g for a programme of 20 minutes Selecting Delay StartSelecting Time Starting the drying programmeDrying programme complete / removing laundry Drying rackOpen the loading door Insert the rack After cleaning do not forget to put it back Care and cleaningCleaning fluff filter Clean the entire filter area Emptying the condensate tank Cleaning the door sealTurn both lock washers inwards Cleaning heat exchangerCare and cleaning Cleaning the drum Cleaning the water recirculation valve/filterWhat to do if Clean operating screen and housingTroubleshooting by yourself What to do ifGramme chart chapter Complete Changing the bulb for interior lightingSettings Water Hardness 93/68/EEC dated 22.07.1993 CE Marking Directive Technical dataTechnical data Hints for test institutesAppliance must be moved in vertical position for transport InstallationAppliance positioning Drying rack unpacking Removing transport safety packagingInstallation Terminal «N» or coloured black Or by the earth symbol Or coloured green YellowElectrical connection For easiest unpacking turn the rack upside downDoor reversal ServiceSpecial accessories 0870 5 929 GB IE Guarantee/Customer ServiceStandard guarantee conditions Tel European GuaranteeAlbania +35 Luxembourg Page Page 136905540-01-25072008
Related manuals
Manual 64 pages 17.28 Kb