Something not working?
Symptom | Possible cause | Solution | |
| Fluff filter has not been | Replace the fluff filter | |
The door cannot be closed | inserted correctly and/or | and ensure the filter lid is | |
| the filter lid not closed | closed | |
Display EMPTY WATER | Condensate container full | Empty the condensate | |
(RESERVOIR) is lit | container | ||
|
| With the container pulled | |
EMPTY WATER (RESERVOIR) | Foreign bodies, e. g. ani- | out, switch on the | |
mal hairs, can block the | appliance momentarily. | ||
indicator illuminated, even | |||
inlet nozzle as well as the | The blockage can be | ||
though the container has | |||
valve on the end of the | removed from the contai- | ||
already been emptied | |||
container | ner shaft or the hair clea- | ||
| |||
|
| ned out of the valve | |
|
| Select time program or | |
The dryer terminates the | Too dry or too little | higher drying stage (e.g. | |
drying process automatically: | EXTRA DRY (EXTRA- | ||
laundry | |||
END (EINDE) is displayed | DROOG) instead of | ||
selected program | |||
shortly after program start | VERY DRY (INTENSIEF- | ||
| |||
|
| DROOG)) | |
The drying process takes |
| Check the program | |
SPECIAL CARE (LAGE | selection: SPECIAL CARE | ||
unusually long. 4.5 hours | |||
TEMPERATUUR) button | (LAGE TEMPERATUUR) | ||
after the beginning of the | |||
pressed and too much | button appropriate only | ||
drying process: | |||
laundry | for laundry amounts up | ||
- END (EINDE) display is illu- | |||
| to 2.5kg | ||
minated |
| ||
|
| ||
Too much laundry | Reduce the amount of | ||
- drying procedure is inter- | |||
rupted | laundry | ||
- Programme progress display |
| ||
is flashing | Laundry too damp | ||
thoroughly | |||
|
| ||
|
|
|
If you do not find the required information in this manual to remedy a disturbance, please call the customer service.
28