American Dryer Corp CG20, D20, SL20, STI-8 Back Guard Removal, Lint BOX / Blower Assembly Removal

Page 5

BACK GUARD REMOVAL:

Remove all facing visible screws.

LINT BOX / BLOWER ASSEMBLY REMOVAL:

Unplug wires from Direct Spark Ignition (DSI) module.

TOP COVER REMOVAL:

With the back guard removed, the top is removed by pulling it toward the rear of the dryer and up.

Remove screws and nuts at the rear of the lint box. Unplug wires from the capacitor.

450261-2

www.amdry.com

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Service Procedures For the Model 20 Dryers Retain This Manual in a Safe Place for Future Reference Table of Contents Upper Front Panel Removal Part Locations and RemovalLower Front Panel Removal TOP Cover Removal Lint BOX / Blower Assembly RemovalBack Guard Removal Lint BOX / Blower Assembly Removal Oven Removal GAS Valve RemovalTumbler Support Wheel Assembly Replacement Examples Tumbler AlignmentElectrical Panel Oven Contactor Door SwitchElectrical Component Locations Direct Spark Ignition DSI Module Fire Suppression System Items and Sail SwitchFLAME-PROBE FLAME-PROBE PositioningRotation Switch Exhaust PROBE, Exhaust HI-LIMIT, and Lint Drawer SwitchRequired Items Belt InstallationAmerican Dryer Corp 450261-2 Placing the Belt Back on the Motor Sheave ADC Part No 2 09/15/05
Related manuals
Manual 32 pages 60.74 Kb Manual 38 pages 46.63 Kb
Top Page Image Contents