TUMBLER ALIGNMENT:
Proper alignment is achieved by making the gap between the tumbler and openings in the front and rear bulkheads equal on all sides.
The gap may be checked for accuracy by using a thickness gauge.
Adjust the tumbler position by loosening the three bolts and forcing the wheel assembly toward the center of the dryer to raise the tumbler and to move it away from the side. A large screwdriver can provide the necessary leverage.
Adjustment of the front of the tumbler is made the same as the rear. The gap on the top, bottom, left and right are to be made equal by moving the wheel assemblies.
EXAMPLES:
Below, both wheel assemblies must be moved to the right in order to move the tumbler right. The left wheel assembly must move a little more than the right in order to lift the tumbler.
Below, both wheel assemblies must be moved inward in order to move the tumbler straight upward.
www.amdry.com | 9 |