Part Locations and Removal
LOWER FRONT PANEL REMOVAL:
Remove the lint drawer. Remove the four screws located just below the loading door. Tilt the top of the panel out and lift the panel up and away from the dryer.
MIDDLE PANEL REMOVAL:
Remove the four/two screws along bottom of panel. Next, remove four/two screws along top of panel.
UPPER FRONT PANEL REMOVAL:
Remove the four screws located just above the top loading door. Tilt the bottom of the panel out and lift the panel up and away from the dryer.
TOP COVER REMOVAL:
First remove the back guard, the four screws holding top cover. Next pull top cover toward the rear of the dryer and lift up.
Tilt the top of the panel out, disconnect electrical connection to computer panel, lift panel and unhook support brackets.
4 | American Dryer Corporation |