American Dryer Corp ML-175DR installation manual Preparation for OPERATION/START-UP

Page 32

I. PREPARATION FOR OPERATION/START-UP

The following items should be checked before attempting to operate the dryer:

1.Read ALL “CAUTION,” “WARNING,” and “DIRECTION” labels attached to the dryer.

2.Check incoming supply voltage to be sure that it is the same as indicated on the dryer data label. In the case of 208 VAC or 240 VAC the supply voltage must match the electric service exactly.

3.GAS MODELS – check to ensure that the dryer is connected to the type of heat/gas indicated on the dryer data label.

4.GAS MODELS – the sail switch damper assembly was installed and pre-adjusted at the factory prior to shipping. However, each sail switch adjustment must be checked to ensure that this important safety control is functioning.

5.Check to be sure that the drive belts between the idler pulley and the motor pulley have been reconnected.

NOTE: The drive belts were disconnected at the factory prior to dryer shipment.

6.GAS MODELS – be sure that ALL gas shutoff valves are in the open position.

7.Be sure ALL back panels (guards) and electric box covers have been replaced.

8.Check ALL service doors to ensure that they are closed and secured in place.

9.Be sure the lint drawer is securely in place.

NOTE: LINT DRAWER MUST BE ALLTHE WAY IN PLACE TO ACTIVATE THE SAFETY SWITCH OTHERWISE THE DRYER WILL NOT START.

10.Rotate the basket (tumbler/drum) by hand to be sure it moves freely.

11.Check bolts, nuts, screws, terminals, and fittings for security.

12.GAS MODELS AND STEAM MODELS – check to ensure air supply (80 psi [5.51 bar]) is connected to the dryer.

13.STEAM MODELS – check to ensure ALL steam shutoff valves are open.

14.STEAM MODELS – check steam damper operation.

15.Check basket (tumbler) bearing setscrews to ensure they are ALL tight.

28

American Dryer Corp.

113406-1

Page 31 Page 33
Image 32
Page 31 Page 33
Contents ML-175DR Installation Manual Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Safety Precautions SectionStandards Specifications SpecificationsSpecifications GAS and Steam Installation Procedures Location RequirementsUNPACKING/SETTING UP American Dryer Corp 113406-1 Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements General Exhaust Ductwork InformationNot be Reduced Anywhere Downstream of the Dryer 113406-1 Outside Ductwork Protection 113406-1 American Dryer Corp 113406-1 Electrical Information Electrical RequirementsElectrical Service Specifications PER Dryer 113406-1 GAS Information Type of GAS American Dryer Corp 113406-1 113406-1 Steam Information Operating Steam PressureSteam Damper System Compressed Air Supply Air Pressure 113406-1 Preparation for OPERATION/START-UP Preoperational Tests Basket Tumbler Coating Compressed Air Supply Air Pressure Compressed AIR RequirementsShutdown Instructions Parts SERVICE/PARTS InformationService Warranty Information Returning Warranty CardsWarranty Returning Warranty Parts113406-1 Routine Maintenance CleaningSteam Dryers Adjustments LubricationManual Reset Burner HI-LIMIT Instructions PhaseSectionviii Data Label InformationProcedure for Functional Check Replacement Components American Dryer Corp 113406-1 Fire Suppression System In Action Fire Suppression SystemInstallation Before YOU Start Check Local Codes and PermitsTypical Water Supply Inoperative Fire Suppression System Theory of Operation Fire Suppression System Water Valve Check Starting a Cycle When Computer is in F.S.S. is Disabled Mode ADC113406 1 01/07/05

ML-175DR specifications

American Dryer Corp ML-175DR is a high-efficiency, state-of-the-art hand dryer designed to provide a superior drying experience in public restrooms and commercial environments. With its sleek and modern design, the ML-175DR not only enhances the aesthetic appeal of any facility but also offers numerous practical benefits.

One of the standout features of the ML-175DR is its powerful motor, which generates a strong airflow of up to 17,000 RPM. This ensures that hands are dried quickly and effectively, taking only about 10 to 15 seconds to achieve optimal dryness. This efficiency significantly reduces waiting time for users, making it a convenient choice for high-traffic areas.

The ML-175DR incorporates advanced sensor technology that allows for touchless operation. The built-in infrared sensors detect the presence of hands beneath the nozzle, automatically activating the drying process. This feature not only promotes hygiene by minimizing contact with surfaces but also helps conserve energy, as the dryer only operates when needed.

Another noteworthy characteristic of the ML-175DR is its eco-friendly design. It is constructed with energy-efficient components that use significantly less power compared to traditional hand dryers. This not only reduces electricity costs but also supports sustainability efforts by minimizing the carbon footprint associated with restroom facilities.

Moreover, the ML-175DR includes an adjustable airspeed feature, allowing users to customize their drying experience according to different environments. Whether it’s a busy restaurant or a quiet office, the adjustable settings enable optimal performance tailored to the specific needs of each location.

In terms of durability, the ML-175DR is built with heavy-duty materials that ensure longevity, making it a reliable choice for various commercial and public settings. Its robust construction is resistant to wear and tear, which is essential for hand dryers that see frequent use.

In summary, the American Dryer Corp ML-175DR stands out for its powerful yet efficient drying capabilities, touchless operation, eco-friendly design, adjustable airspeed, and durable construction. These features make it an excellent choice for modern facilities looking to enhance hygiene, improve user experience, and promote sustainability.
Top Page Image Contents