JVC KD-S717 Sound Adjustments, Function, Adjusting the sound, Using the Sound Control Memory

ENGLISH

SOUND ADJUSTMENTS

Turning on/off the loudness	2 Adjust the level.
function	To increase the level.
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these	To decrease the level.
frequencies to produce a well-balanced sound at
low volume levels.
Each time you press LOUD, the loudness
function turns on/off alternatively.

Equalization pattern changes as you adjust the bass or treble.

Adjusting the sound

You can adjust the sound characteristics to your preference.

1 Select the item you want to adjust.

Each time you press the button, the adjustable items change as follows:

	BAS			TRE				FAD
	(bass)		(treble)					(fader)
		VOL			BAL
	(volume)			(balance)
Indication	To do:					Range
BAS	Adjust the bass.				–06 (min.)
					+06 (max.)
TRE	Adjust the treble.				–06 (min.)
					+06 (max.)
FAD*	Adjust the front				R06 (Rear only)
	and rear speaker
	balance.				F06 (Front only)
BAL	Adjust the left				L06 (Left only)
	and right speaker
	balance.				R06 (Right only)
VOL	Adjust the volume.				00		(min.)
					50		(max.)

*If you are using a two-speaker system, set the fader

12

Note:

Normally the control dial works for volume adjustment. So you do not have to select “VOL” to adjust the volume level.

Using the Sound Control Memory

You can select and store a preset sound

adjustment suitable for each playback source.

(Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display.

A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM and CD.

•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM – SCM LINK” on page 15.

Select the sound mode you want.

Each time you press the button, the sound mode changes as follows:

BEAT SOFT POP SCM OFF