American Dryer Corp ML-95 manual Retain This Manual In a Safe Place For Future Reference

Page 2

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

POUR VOTRE SÉCURITÉ

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO.

ML-95 Phase 6

RESELLER’S NAME

_______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Image 2
Contents ML-95 Parts Manual American Dryer CorporationRetain This Manual In a Safe Place For Future Reference Table of Contents Control Door Assembly Phase 6 Microprocessor Panel Assembly As of February 11Prior to February 11 Sensor Bracket Assembly Front Panel/Main Door Assemblies As of October 24Front Panel/Main Door Assemblies Prior to October 24 Front Panel/Main Door Assemblies Main Door Switch Main Door Switch Lint Door Assembly Lint Door Assembly Basket Tumbler Assembly Front Thruster Wheel Assembly Between September 15, 1997 and April 6Prior to September 15 Rear Thruster Wheel Assembly Rear Thruster Wheel Assembly As of April 6 As of April 6 Idler Shaft Assembly As of December 15Prior to December 15 Drive Shaft Assembly Drive Shaft Assembly Drive Motor Assembly Blower Fan/Impellor Motor Assembly Sail Switch Assembly As of July 1 Blower Fan/Impellor Wheel Assembly with Air Jet Blower Fan/Impellor Wheel Assembly without Air Jet Prior to July 1Blower Fan/Impellor Wheel Assembly without Air Jet Burner Assembly Burner Assembly Reversing Relay Panel Assembly For 208/230/240/380/416 Volt Models onlyReversing Relay Panel Assembly For 460/480 Volt Models only Transition Piece Assembly with Damper As of September 12Exhaust Adapter Assembly Prior to September 12Pneumatic Valve Assembly