American Dryer Corp ML-75DIII installation manual Compressed AIR Supply AIR Pressure

Page 37

a. Air Requirements

COMPRESSED AIR SUPPLY

AIR PRESSURE

 

 

 

Normal

80 PSI

5.51 bars

 

 

 

Minimum Supply

70 PSI

4.82 bars

 

 

 

Maximum Supply

90 PSI

6.20 bars

 

 

 

Shaded areas are stated in metric equivalents

 

 

b.Air Connection

Air connection to system --- 1/8-inch N.P.T.

c.No air regulator or filtration is provided with the dryer. External regulation/filtration of 80 PSI (5.51 bars) must be provided. It is suggested that a filter/regulator/gauge (F/R/G) arrangement be added to the compressed air line just before the dryer connection. This is necessary to insure that correct and clean air pressure is achieved.

5.Steam Damper System Operation

The MLS-75 steam damper shown in Diagram 1 in the illustration below, allows the coil to stay constantly charged eliminating repeated expansion and contraction. When the damper is opened, the air immediately passes through the already hot coil, providing instant heat to start the drying process. When the damper is closed, ambient air is drawn directly into the basket (tumbler), allowing a rapid cool down (Diagram 2).

Diagram 1 shows the damper in the heating (open) mode, allowing heat into the basket (tumbler).

Diagram 2 shows the damper in the cool down (closed) mode, pulling ambient air directly into the basket (tumbler) without passing through the coils.

NOTE: With the dryer off or with no air supply, the steam damper is in cool down mode as shown in Diagram 2.

33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents ML-75DIII Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Section Procedure for Functional Check of Replacement Receiving and Handling Important InformationWhat to do if YOU Smell GAS Safety PrecautionsStandards Specifications SPECIFICATIONS/COMPONENT IdentificationSpecifications Component Identification Dryer Rear View Illus. No Location Requirements Installation ProceduresUNPACKING/SETTING UP Dryer Enclosure Requirements Fresh AIR Supply General Exhaust Ductwork Information Exhaust RequirementsPage Page Page Page Electrical Requirements Electrical InformationMLS-75 Steam MLE-75 Electric Grounding Single-Phase 1Ø Electrical Connections Leads Page Phase 3ø Wiring Connections/Hookup Reversing Models Only Electrically Heated Models Only GAS Information Type of GAS Page Steam Information Operating Steam Pressure Steam Damper Air System Connections Compressed AIR Supply AIR Pressure Page Preparation for OPERATION/START-UP Preoperational Tests Basket Coating Preoperational Instructions Shut Down Instructions Service SERVICE/PARTS InformationParts Returning Warranty Cards Warranty InformationWarranty Returning Warranty PartsPage Cleaning Routine MaintenanceDays AdjustmentsLubrication Procedure for Functional Check Replacement Components Page Sectionviii Reversing Timer SPIN/DWELLADJUSTMENTSData Label Data Label InformationSerial Number P O R T a N T For Phase 7 ModelsFor Dual Timer Models Fire Suppression System F.S.S S. In ActionBefore YOU Start Check Local Codes and Permits InstallationWater Connections Optional Manual Bypass Fire Suppression System F.S.S. Theory of Operation Parts Break Down Comp x 3/8 M.P.T. Brass Connector 822752 ADC113343 1 09/26/01-25

ML-75DIII specifications

The American Dryer Corp ML-75DIII is a high-performance dryer designed to meet the demanding needs of commercial laundry facilities. Known for its robust construction and innovative features, this dryer sets a new standard for efficiency and reliability in laundry applications.The ML-75DIII boasts an impressive drying capacity, making it an ideal choice for laundromats, hotels, and other establishments with high laundry volumes. Its 75-pound capacity allows for large loads, reducing the time and energy required to dry multiple smaller batches. This efficiency not only saves time but also optimizes operational workflow, enabling staff to focus on other critical tasks.

One of the standout features of the ML-75DIII is its advanced control system. Equipped with an intuitive microprocessor control, it allows users to select from multiple drying cycles, temperatures, and times, ensuring that every batch is processed to perfection. The control panel is user-friendly, making it easy for operators to make adjustments and monitor the drying process in real-time.

Moreover, the ML-75DIII incorporates intelligent moisture sensing technology that detects the moisture level of the laundry and adjusts the drying time accordingly. This feature prevents over-drying, preserving the quality of fabrics while reducing energy consumption. The dryer’s high-efficiency heating elements further contribute to its performance, delivering powerful heat while minimizing energy use.

Safety is also a top priority in the design of the ML-75DIII. The dryer is equipped with a host of safety features, including a door safety switch that prevents operation when the door is open. Additionally, the machine includes a robust lint filtration system that ensures lint is effectively captured, reducing fire hazards and promoting a clean working environment.

Durability is another hallmark of the ML-75DIII. Its heavy-duty construction using high-quality materials ensures that the dryer can withstand the rigors of daily use in a commercial setting. The stainless steel drum is resistant to corrosion and wear, providing a long-lasting solution for any laundry operation.

In conclusion, the American Dryer Corp ML-75DIII combines advanced technology with practical features to deliver a top-tier drying experience. Its high capacity, intelligent controls, energy efficiency, and safety measures make it a preferred choice for commercial laundry facilities looking to enhance productivity and reliability.
Top Page Image Contents