American Dryer Corp AD-120ES III installation manual Steam Information, 689.47 kPa, 204 kg/hr

Page 35

H. STEAM INFORMATION

It is your responsibility to have ALL steam plumbing connections made by a qualified professional to assure that the installation is adequate and conforms to local and state regulations or codes.

IMPORTANT: Failure to comply with the requirements stipulated in this manual can result in component failure, which will VOID THE WARRANTY.

NOTE: The dryer is manufactured with a pneumatic (piston) damper system, which requires an external supply of clean, dry, and regulated air of 0.75 cfh (0.02 cmh) @ 80 PSI +/- 10 PSI (5.51 bar +/- 0.69 bar). Refer to Steam Damper Air System Connections, Section H,

item 4.

1.Steam Coil PH Level

The normal PH level for copper type steam coils must be maintained between a value of 8.5 to 9.5. For steel type steam coils the PH level must be maintained between a value of 9.5 to 10.5. These limits are set to limit the acid attack of the steam coils.

IMPORTANT: Coil failure due to improper PH level will VOID THE WARRANTY.

2.Steam Requirements, High Pressure

a.Inlet ----1-1/4” supply line connection --- qty. one (1) at top manifold.

b.Return --1-1/4” return line connection --- qty. one (1) at bottom manifold.

Operating Steam Pressure

Maximum

125 psig

862.84 kPa

 

 

 

Minimum

100 psig

689.47 kPa

 

 

 

Heat Input (Normal Load)

13 Bhp

 

 

 

Consumption (Approximate)

450 lbs/hr

204 kg/hr

 

 

 

Shaded areas are stated in metric equivalents

3.Installation Instructions

To insure that an adequate supply of steam is provided, be sure that the steam supply lines and steam return lines are sized and laid out as stipulated in this manual. Inadequate steam supply lines and steam return lines are sized and laid out as stipulated in this manual. Inadequate steam supply and steam return lines or improper steam plumbing will result in poor performance and can cause component failure. Clean, dry, and regulated steam must be provided to the dryer.

IMPORTANT: Steam coil failure due to water hammer by wet steam will VOID THE WARRANTY.

31

Page 34 Page 36
Image 35
Page 34 Page 36
Contents AD-120ES Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Section Procedure for Functional Check of Replacement Receiving and Handling Important InformationWhat to do if YOU Smell GAS Safety PrecautionsStandards Specifications SPECIFICATIONS/COMPONENT IdentificationADG-120ES ADE-120ES ADS-120ES Component Identification Page Location Requirements Installation ProceduresUNPACKING/SETTING UP Page This Exhaust Duct Transition Piece Must be Installed First Dryer Enclosure Requirements Fresh AIR Supply Requirements General Exhaust Ductwork Information Exhaust RequirementsPage Page Page Page Page Electrical Requirements Electrical InformationElectrical Service Specifications PER Dryer ADE-120 III 72 kW Electric Reversing, 3ø Page Page GAS Information Type of GAS Page Page 204 kg/hr Steam Information689.47 kPa Page COM Pressed AIR Pressure AIR Supply Page Preparation for Operation Preoperational Tests Page Basket Tumbler Coating Shutdown InstructionsOperating Instructions Parts SERVICE/PARTS InformationService Returning Warranty Parts Warranty InformationReturning Warranty Cards WarrantyPage Suggested Cleaning Schedule Routine MaintenanceCleaning Steam Dryers Lubrication AdjustmentsDrive motor is not operating does not start TroubleshootingBlower motor is not operating does not start Microprocessor controller computer display reads door Microprocessor controller computer display reads dSFLPage No heat for Electric Models only No heat for Steam Models onlyCondensation on main door glass Dryer operates but is taking too long to dryExcessive noise and/or vibration Dryer is making scraping noise at basket tumbler areaGAS Models Drive motor only is not operating does not startElectric Models Dryer operates but is taking too long to dry load Condensation on main door glass Data Label Data Label InformationHeat Input for GAS Dryers Data Label Model NumberTiming Legend Reversing Timer SPIN/DWELLADJUSTMENTSProcedure for Functional Check Replacement Components Page P O R T a N T ADC P/N114501

AD-120ES III specifications

The American Dryer Corp AD-120ES III is a high-performance, energy-efficient hand dryer designed for commercial environments where durability and hygiene are key requirements. This model combines advanced technology with user-friendly features to deliver a superior drying experience.

One of the standout features of the AD-120ES III is its powerful 1.1 horsepower motor, which allows the dryer to deliver a high-speed airflow of approximately 200 miles per hour. This rapid drying capability significantly reduces drying time, ensuring that users have a quick and effective way to dry their hands. Additionally, the dryer operates quietly, making it suitable for environments where noise control is important, such as offices, restaurants, and educational institutions.

Energy efficiency is another hallmark of the AD-120ES III. The unit is equipped with an energy-saving mode that can reduce power consumption by up to 85%. This feature not only helps to conserve energy but also contributes to lower operating costs, making it an eco-friendly choice for businesses. The dryer’s electronic sensor technology ensures that it activates only when hands are underneath, further enhancing its efficiency.

The design of the AD-120ES III emphasizes hygiene and cleanliness. With a touchless operation, users can dry their hands without needing to touch any surface, reducing the risk of cross-contamination. The dryer also features a high-quality HEPA filtration system that captures 99.97% of particles as small as 0.3 microns from the air that passes through it, ensuring that the air used for drying is clean and safe.

Durability and ease of maintenance are also key characteristics of the AD-120ES III. Constructed from robust stainless steel, this hand dryer is designed to withstand the rigors of high-traffic environments. Its easy-to-remove cover allows for straightforward maintenance, making it simple to keep the unit in optimal working condition.

In summary, the American Dryer Corp AD-120ES III is a reliable and effective choice for commercial hand drying solutions. With its powerful motor, energy-saving features, touchless operation, and high-quality filtration, it meets the needs of both users and facility managers looking for efficiency, hygiene, and reliability. The combination of advanced technology and thoughtful design makes the AD-120ES III a leading option in the hand dryer market.
Top Page Image Contents