Additional Instructions for Export Models

ADDITIONAL INSTRUCTIONS FOR EXPORT MODELS

(Not U.S. Mexico, or Canada) Contact the distributor that sold the appliance or: Maytag International,

1475 East Woodfield Road Schaumburg, Illinois 60173 Phone: 847-273-3100, for information on product, shipping damage, replacement parts and accessories.

Maytag dryer models manufactured for operation on 60Hz AC are not designed for use on 50Hz AC electrical service and conversion of the product from 60 to 50Hz operation is not recommended. For additional information on 50Hz product, contact Maytag International. The electric service reqirements can be found on the data label located on the front of the dryer behind the door.

EXPORT ELECTRIC MODELS

Some export electric models are manufactured for operation on 230/240 volt, 50 Hz and some for operation on 220 Volt, 60 Hz electric service. A two-wire approved electrical service with a 30-amp fuse or circuit breaker is required. The dryer must be earthed with an earthing wire.

IMPORTANT: When permitted by local codes the dryer electrical supply may be connected by means of a power supply cord kit. The cord must marked for use with clothes dryers, agency listed, rated for 240 volts - 30 amp minimum. The cord should be terminated with closed loop terminals, open-end spade lugs with turned up ends or with tinned leads. Do not reuse a power supply cord from an old dryer. The power cord or electric supply wiring must be retained at the dryer cabinet with a suitable agency listed strain relief.

2-WIRE SYSTEM CONNECTIONS

1.Loosen or remove center terminal block screw.

2.Connect neutral wire (White or center wire) of power supply cord to the center, silver colored terminal screw of the terminal block. Tighten screw.

3.Connect the other wire to outer terminal block serew. Tighten screw.

4.Tighten strain relief screws.

5.Insert tab of terminal block cover into slot of dryer rear panel, Sccure cover with hold-down screw.

1. External ground connector

2. Neutral grounding wire (green.yellow)

3. Center silver-colored terminal clock screw.

4. Neutral wire (white or center wire)

5. 3/4 in. (1.9 c m ) UL-listed strain relief

6. Neutral wire (white or center wire)

BEFORE OPERATING OR TESTING, be sure the machine is properly grounded.

EXPORT GAS MODELS

Some export gas models are manufactured for operation on 230/240 volt, 50 Hz and some for operation on 220 volt, 60 Hz electrical service with a 15 amp fuse or circuit breaker.

Export gas models have been manufactured for use with natural gas having a higher heating value of approximately 1025 BTU per cubic foot. Conversion to LP gas with a higher heating value must be performed by a qualified service technician. A 33002927 Natural Gas to LP Gas, 50 Hz conversion kit is available.

DC68-02033B-03 specifications

The Maytag DC68-02033B-03 is a highly regarded appliance designed to enhance the efficiency and convenience of laundry tasks in modern homes. This product is designed with a focus on durability, performance, and user-friendliness.

One of the standout features of the Maytag DC68-02033B-03 is its robust construction. Built with high-quality materials, this unit promises longevity and reliability, making it a valuable investment for any household. Its stainless steel drum resists odors and chips, ensuring that it remains in excellent condition even after years of use. Additionally, the appliance boasts a powerful motor that enhances its performance across various wash cycles.

The DC68-02033B-03 is equipped with advanced technologies that optimize laundry processes. The Precision Wash technology features sensors that automatically adjust water levels and wash times based on the load size and fabric type, providing an efficient wash every time. This not only saves water but also enhances cleaning effectiveness.

Another significant innovation in this model is its Optimal Dispensers system, which releases the right amount of detergent at the right time. This feature helps to maximize cleaning power while preventing excess suds that can potentially damage the unit. The machine also includes a variety of wash cycles, enabling users to select from options designed for different fabric care needs, making it versatile for all laundry types.

User convenience is evident in the Maytag DC68-02033B-03’s intuitive controls and large capacity. The easy-to-read display and straightforward buttons ensure that users can easily navigate through settings, while the spacious drum allows for larger loads, reducing the number of washes required.

Energy efficiency is another characteristic of the Maytag DC68-02033B-03. It is designed to comply with ENERGY STAR standards, meaning it uses less energy than traditional models. This not only benefits the environment but also lowers utility bills, making it a cost-effective choice for families.

In conclusion, the Maytag DC68-02033B-03 is a remarkable appliance that combines durability, advanced technology, and user-friendly features. Its focus on efficiency and care for fabrics makes it an excellent option for those seeking a reliable washing solution that meets the demands of today’s busy lifestyles. Whether for large families or individual users, this Maytag model stands out in the competitive laundry appliance market.