Electric and GAS Dryer

		ELECTRIC AND GAS DRYER

		Weather Hood Type

	Recommended		Use only for short run installation

	4”(10,16 cm)			2 1/2”(6,35 cm)

No. of 90°	Rigid	Metallic Flexible*	Rigid	Metallic Flexible*
elbows	Rigid	Metallic Flexible*	Rigid	Metallic Flexible*
0	24.4 m (80 ft.)	12.4 m (41 ft.)	22.6 m (74 ft.)	10.1 m (33 ft.)
1	20.7 m (68 ft.)	11.2 m (37 ft.)	18.9 m (62 ft.)	8.8 m (29 ft.)
2	17.4 m (57 ft.)	10.1 m (33 ft.)	15.5 m (51 ft.)	7.6 m (25 ft.)
3	14.3m (47 ft.)	9.0 m (29 ft.)	12.5 m (41 ft.)	6.5 m (21 ft.)

*Do not use non metallic flexible duct.

•Exhaust systems longer than recommended can extend drying times, affect machine operation and may collect lint.

•The exhaust duct should end with an exhaust hood with a swing out damper to prevent back drafts and entry of wildlife. Never use an exhaust hood with a magnetic damper.

•The hood should have at least 12 inches (30.5 cm) of clearance between the bottom of the hood and the ground or other obstruction. The hood opening should point down.

Never install a screen over the exhaust outlet.

•When possible, do not exhaust the dryer directly into a window well in order to avoid lint build- up. Do not exhaust under a house or porch.

•If exhaust ductwork must run through an unheated area, the duct should be insulated and slope slightly down towards the exhaust hood to reduce condensation and lint build-up.

•Inspect and clean the interior or the exhaust system at least once a year. Disconnect electrical service prior to cleaning.

•Frequently check to be sure the exhaust hood damper opens and closes freely.

If new dryer is installed into an existing exhaust system you must be sure:

•The exhaust system meets all local, state and national codes.

•That plastic flexible duct is not used.

•Inspect and clean all lint accumulation from the interior of the existing duct.

•The duct is not kinked or crushed.

•The exhaust hood damper opens and closes freely.

The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0.

This can be measured with the dryer running with a manometer at the point where the exhaust duct connects to the dryer. A no heat setting should be used.

The dryer tumbler should be empty and the lint filter clean.

DC68-02033B-03 specifications

The Maytag DC68-02033B-03 is a highly regarded appliance designed to enhance the efficiency and convenience of laundry tasks in modern homes. This product is designed with a focus on durability, performance, and user-friendliness.

One of the standout features of the Maytag DC68-02033B-03 is its robust construction. Built with high-quality materials, this unit promises longevity and reliability, making it a valuable investment for any household. Its stainless steel drum resists odors and chips, ensuring that it remains in excellent condition even after years of use. Additionally, the appliance boasts a powerful motor that enhances its performance across various wash cycles.

The DC68-02033B-03 is equipped with advanced technologies that optimize laundry processes. The Precision Wash technology features sensors that automatically adjust water levels and wash times based on the load size and fabric type, providing an efficient wash every time. This not only saves water but also enhances cleaning effectiveness.

Another significant innovation in this model is its Optimal Dispensers system, which releases the right amount of detergent at the right time. This feature helps to maximize cleaning power while preventing excess suds that can potentially damage the unit. The machine also includes a variety of wash cycles, enabling users to select from options designed for different fabric care needs, making it versatile for all laundry types.

User convenience is evident in the Maytag DC68-02033B-03’s intuitive controls and large capacity. The easy-to-read display and straightforward buttons ensure that users can easily navigate through settings, while the spacious drum allows for larger loads, reducing the number of washes required.

Energy efficiency is another characteristic of the Maytag DC68-02033B-03. It is designed to comply with ENERGY STAR standards, meaning it uses less energy than traditional models. This not only benefits the environment but also lowers utility bills, making it a cost-effective choice for families.

In conclusion, the Maytag DC68-02033B-03 is a remarkable appliance that combines durability, advanced technology, and user-friendly features. Its focus on efficiency and care for fabrics makes it an excellent option for those seeking a reliable washing solution that meets the demands of today’s busy lifestyles. Whether for large families or individual users, this Maytag model stands out in the competitive laundry appliance market.

DC68-02033B-03 specifications