JVC KD-S7250 manual How to reset your unit, Information For USA, Precautions

Page 2

ENGLISH

INFORMATION (For USA)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT FOR LASER PRODUCTS

Precautions:

1.CLASS 1 LASER PRODUCT

2.CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all servicing to qualified service personnel.

4.CAUTION: This CD player uses invisible laser radiation, however, is equipped with safety switches to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.

5.CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

How to reset your unit

(Standby/On/ATT)

Press and hold both the SEL (Select) and (Standby/On/ATT) buttons at the same time for several seconds.

This will reset the built-in microcomputer.

NOTES: Your preset adjustments — such as preset channels or sound adjustments — will also be erased.

If a CD is in the unit, it will eject when you reset the unit. Pay attention not to drop the CD.

SEL (Select)

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents KD-S7250/KD-S700 KD-S680 For customer UseInformation For USA How to reset your unitPrecautions Contents Display window Location of the ButtonsControl panel Remote controller Controller Installing the batteryPreparing the remote To turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSearching a station automatically Auto search Radio Basic OperationsListening to the radio Searching a station manually Manual searchStoring stations in memory FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Other convenient tuner functions Tuning into a preset stationManual preset Scanning broadcast stationsTo stop play and eject the CD CD OperationsPlaying a CD Insert a disc into the loading slotTo play back tracks repeatedly Repeat Play To fast-forward or reverse the trackTo go to the next tracks or the previous tracks To go to a particular track directlyPress and hold CD and 0 for more than 2 seconds To cancel the prohibition and unlock the CDProhibiting CD ejection Turning on/off the loudness function Sound AdjustmentsAdjusting the sound Selecting and storing the sound modesRecalling the sound modes When SCM Link is set to Link ON, select the sourceFor Preset values Call up the sound mode you want to adjust Storing your own sound adjustmentsTo reset to the factory settings Repeat the same procedure to store other sound modesSetting the clock To check the current clock time changing the display modePress and hold SEL for more than Seconds To Cancel Advanced SCMSelecting the level display How to detach the control panel How to attach the control panelMaintenance Handling CDsTroubleshooting Symptoms Causes RemediesAM Tuner SpecificationsFM Tuner Call
Top Page Image Contents