JVC KD-S7250 manual Specifications, FM Tuner, AM Tuner

Page 22

SPECIFICATIONS

ENGLISH

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front: 45 W per channel

Rear: 45 W per channel

Continuous Power Output (RMS):

Front: 17 W per channel into 4 , 40 to

20 000 Hz at no more than 0.8% total harmonic distortion.

Rear: 17 W per channel into 4 , 40 to

20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 (4 to 8 allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 2.0 V/20 kload (full scale)

Output Impedance: 1 k

TUNER SECTION

Frequency Range

FM: 87.5 MHz to 107.9 MHz

AM: 530 kHz to 1 710 kHz

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

GENERAL

Power Requirement

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Allowable Working Temperature:

0°C to +40°C (32°F to 104°F) Grounding System: Negative ground Dimensions (W x H x D)

Installation Size:

182 mm x 52 mm x 150 mm (7-3/16" x 2-1/16" x 5-15/16")

Panel Size: 188 mm x 58 mm x 14 mm (7-7/16" x 2-5/16" x 5/8")

Mass: 1.3 kg (2.9 lbs) (excluding accessories)

22

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 )

50 dB Quieting Sensitivity:

16.3dBf (1.8 µV/75 )

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

Design and specifications subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

Image 22
Contents KD-S7250/KD-S700 KD-S680 For customer UsePrecautions How to reset your unitInformation For USA Contents Control panel Location of the ButtonsDisplay window Remote controller Preparing the remote Installing the batteryController To turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSearching a station automatically Auto search Radio Basic OperationsListening to the radio Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Other convenient tuner functions Tuning into a preset stationManual preset Scanning broadcast stationsTo stop play and eject the CD CD OperationsPlaying a CD Insert a disc into the loading slotTo play back tracks repeatedly Repeat Play To fast-forward or reverse the trackTo go to the next tracks or the previous tracks To go to a particular track directlyProhibiting CD ejection To cancel the prohibition and unlock the CDPress and hold CD and 0 for more than 2 seconds Turning on/off the loudness function Sound AdjustmentsAdjusting the sound Selecting and storing the sound modesFor Preset values When SCM Link is set to Link ON, select the sourceRecalling the sound modes Call up the sound mode you want to adjust Storing your own sound adjustmentsTo reset to the factory settings Repeat the same procedure to store other sound modesSetting the clock To check the current clock time changing the display modeSelecting the level display To Cancel Advanced SCMPress and hold SEL for more than Seconds How to detach the control panel How to attach the control panelMaintenance Handling CDsTroubleshooting Symptoms Causes RemediesFM Tuner SpecificationsAM Tuner Call