Maytag W10155111A Dryer Care, Drying Rack, Cleaning the Dryer Location, Cleaning the Lint Screen

Page 15

Drying Rack

The drying rack is useful for machine drying items you would not necessarily want to tumble dry (for example, sweaters).

If your model does not have a drying rack, you may be able to purchase one for your model. To find out whether your model allows drying rack usage and for information on ordering, please refer to the front page of the manual or contact the dealer from whom you purchased your dryer.

To use the drying rack

1.Do not remove the lint screen.

2.Slide drying rack over the bottom of the dryer door opening. Push down to secure rack on frame.

3.Put the wet items on top of the rack. Leave space between the items so air can reach all the surfaces. Close the door.

NOTE: Do not allow items to hang over the edge of the rack.

4.Select a timed drying cycle and temperature, or an air cycle. Items containing foam, rubber, or plastic must be dried on a clothesline or by using an air cycle.

5.Press the PUSH TO START button.

NOTE: You must remove the drying rack for normal tumbling. Do not use Sensor Dry cycles with the drying rack.

This chart shows examples of items that can be rack dried and the suggested cycle, temperature setting and drying time. Actual drying time will depend on the amount of moisture items hold.

Rack Dry

Cycle

Temp

Time*

Wool Sweaters

Timed

Low

60

Block to shape and lay flat on the rack

 

 

 

 

 

 

 

Stuffed toys or pillows

Timed

Low

60

Cotton or polyester fiber filled

 

 

 

 

 

 

 

Stuffed toys or pillows

Timed

Air

90

Foam rubber filled

 

(no heat)

 

 

 

 

 

 

 

 

Sneakers or canvas shoes

Timed

Air

90

 

 

(no heat)

 

 

 

 

 

*(Minutes) Reset time to complete drying, if needed.

DRYER CARE

Cleaning the Dryer Location

Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches (46 cm) above the floor for a garage installation.

Failure to do so can result in death, explosion, or fire.

Cleaning the Lint Screen

Clean lint screen before each load. A screen blocked by lint can increase drying time.

IMPORTANT:

Do not run the dryer with the lint screen loose, damaged, blocked or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

If lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint.

Every Load Cleaning

1.The lint screen is located in the door of the dryer. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove.

2.Push the lint screen firmly back into place.

15

Image 15
Contents W10155111A GAS DryerDryer Safety Table of ContentsWhat to do if YOU Smell GAS Important Safety Instructions Installation Instructions Tools and PartsLocation Requirements Mobile home installations require Installation ClearancesMobile Home Additional Installation Requirements Dryer DimensionsGas supply line Electrical RequirementsGas Supply Requirements Gas TypeBurner input requirements Gas supply pressure testingVenting Requirements Gas supply connection requirementsIf this is a new vent system Vent material If using an existing vent systemOptional exhaust installations Alternate installations for close clearancesPlan Vent System Special provisions for mobile home installations Install Vent SystemInstall Leveling Legs Vent system chartFor mobile home use Make Gas ConnectionConnect Vent Level DryerIf the dryer will not start, check the following Complete InstallationHow Sensor Dry Works Dryer USEStarting Your Dryer Stopping and RestartingDryer Care Cleaning the Dryer LocationCleaning the Lint Screen Every Load CleaningChanging the Drum Light Cleaning the Dryer InteriorRemoving Accumulated Lint Vacation and Moving CareTroubleshooting Dryer OperationDryer Results Loads are wrinkled Cycle time too shortLint on load Stains on load or drumU.S.A Assistance or ServiceAccessories If you need replacement partsW10155111A SP PN W10155112A Maytag Corporation Major Appliance Warranty

W10155112A, W10155111A specifications

Maytag is a well-known brand in the appliance industry, recognized for its commitment to quality, performance, and innovation. Among its extensive lineup, the Maytag W10155111A and W10155112A stand out as reliable options for consumers in need of efficient appliance solutions. These products are designed to enhance home efficiency while providing durability and functionality.

The Maytag W10155111A is a replacement part that is primarily used in Maytag washers, specifically the tub seal. It ensures that the washing machine operates smoothly by preventing water leaks from the tub during the washing cycle. This component is crucial for maintaining the integrity of the appliance, leading to better washing performance and preventing potential water damage to the surrounding areas.

On the other hand, the W10155112A is another essential component that functions as a washer. It is designed to work in conjunction with various washing machines to provide optimal performance. This part is engineered to withstand high-pressure conditions and is made from high-quality materials that ensure longevity. The combination of these components contributes to more efficient washing cycles, reducing water usage and energy consumption, thereby offering environmental benefits alongside practicality.

A notable feature of both components is their compatibility with a wide range of Maytag washer models, making them versatile choices for homeowners. Additionally, their easy installation process allows users to replace worn-out parts with minimal effort, saving time and repair costs. Maintenance is also simplified, as these parts are designed for easy access and replacement.

In terms of technology, Maytag emphasizes durability and reliability. The materials used in the manufacturing of these components are carefully selected to withstand the rigors of daily use, ensuring that they can handle a variety of laundry loads without compromising performance.

Overall, the Maytag W10155111A and W10155112A exemplify the brand's dedication to quality and consumer satisfaction. These components not only enhance the performance of Maytag washing machines but also contribute to the long-term efficiency and durability of the appliance. With their ease of installation and reliable performance, these parts are ideal for anyone looking to maintain their washing machine in prime condition. Investing in these components means choosing reliability and efficiency for a modern laundry experience.