Whirlpool IAS5000RQ0 warranty To stop or restart your washer

Page 4

Style 2: Without liquid chlorine bleach dispenser (on some models)

Let the washer fill and begin agitating the load.

Add bleach 5 minutes into the wash cycle for best cleaning and so that bleach can be removed in the rinse cycle. Pour bleach around the agitator, not directly onto the load to avoid damaging clothing or other items in the load.

3.(OPTIONAL) Add liquid fabric softener.

NOTE: Do not spill or drip any fabric softener onto the clothes. Undiluted fabric softener can stain fabrics. Always dilute fabric softener with warm water. Too much fabric softener can make some items (diapers and towels) nonabsorbent. If this happens, do not use it every load, or use less of it in each load.

Style 1: With liquid fabric softener dispenser (on some models)

Use only liquid fabric softener in this dispenser. Pour measured liquid fabric softener into the dispenser. Softener is added automatically during the rinse portion of the cycle. Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the crossbar in the dispenser opening.

Style 2: Without liquid fabric softener dispenser (on some models)

In the final rinse ONLY, add fabric softener that has been diluted with ¹⁄₂ to 1 cup (125 to 250 mL) warm water.

4.Close the washer lid. Washer will not agitate or spin with the lid open.

5.Turn the LOAD SIZE or WATER LEVEL selector to the correct setting for your wash load and the type of fabric being washed. You may change the load size or water level selection after the washer has started filling by turning the selector to a different setting.

6.Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest wash water safe for fabric. Follow garment label instructions.

NOTE: In wash water temperatures colder than 60ºF (15.6ºC), detergents do not dissolve well. Soils can be difficult to remove. Some fabrics can retain wear wrinkles and have increased pilling (the formation of small lint-like balls on the surface of garments).

7.(OPTIONAL) EXTRA RINSE selector (on some models). For an additional rinse and spin at the end of a wash cycle, set the EXTRA RINSE selector to ON. On some models, the EXTRA RINSE feature is part of the cycle.

8.(OPTIONAL) Some models have an END OF CYCLE SIGNAL selector. Set this selector to ON if you want your washer to alert you when the wash cycle is complete.

9.Push in the Cycle Control knob and turn it clockwise to the wash cycle you want. Reduce the wash time when using a small load size setting. Pull out the Cycle Control knob to start the washer.

To stop or restart your washer:

To stop the washer at any time, push in the Cycle Control knob.

To restart the washer, close the lid (if open) and pull out the Cycle Control knob.

4

Image 4
Contents Washer User Instructions Washer Safety Your safety and the safety of others are very importantWasher USE LoadingStarting YourWasher Extra Large Capacity WashersTo stop or restart your washer CleaningYour Washer Washer CareWaterInletHoses Moving and StorageTroubleshooting WasherandComponentsResidue or lint on load WasherResultsStains on load ONE-YEAR Full Warranty Whirlpool Corporation will not pay forTo locate factory specified parts in your area 3955881