Whirlpool IAS5000RQ2 Washer Care, Cleaning Your Washer, Water Inlet Hoses, Moving and Storage

Page 5

WASHER CARE

Cleaning Your Washer

Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach from the outside of your washer.

Clean your washer interior by mixing 1 cup (250 mL) of chlorine bleach and 2 cups (500 mL) of detergent. Pour this mixture into your washer and run it through a complete cycle using hot water. Repeat this process if necessary.

Remove any hard water deposits using only cleaners labeled as washer safe.

Cleaning the liquid fabric softener dispenser (on some models):

1.Remove dispenser by grasping top with both hands and squeezing, while pushing upward with thumbs.

2.Rinse dispenser under warm water, then replace it.

NOTE: Some models are equipped with a liquid fabric softener dispenser. To avoid damage to the washer or clothing do not wash clothes with the liquid fabric softener dispenser removed or add detergent or bleach to this dispenser; it is for liquid fabric softener only.

Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

Moving and Storage

Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather, winterize it.

Winterizing your washer

1.Shut off both water faucets. Disconnect and drain water inlet hoses. Pour 1 qt (1 L) of R.V.-type antifreeze into the basket.

2.Run washer on a drain and spin setting for about 30 seconds to mix the antifreeze and remaining water.

3.Unplug washer or disconnect power.

To use washer again

1.Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Plug in washer or reconnect power.

3.Run the washer through a complete cycle with 1 cup (250 mL) of detergent to clean out antifreeze.

Storage, non-use or vacation care

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

1.Unplug washer or disconnect power.

2.Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.

5

Image 5
Contents Washer User Instructions Your safety and the safety of others are very important Washer SafetyLoading Washer USEStarting Your Washer Extra Large Capacity WashersTo stop or restart your washer Washer Care Cleaning Your WasherWater Inlet Hoses Moving and StorageWasher and Components TroubleshootingStains on load Washer ResultsResidue or lint on load Disclaimer of Implied Warranties Limitation of Remedies ONE Year Limited WarrantyItems Whirlpool will not PAY for

IAS5000RQ2 specifications

The Whirlpool IAS5000RQ2 is a state-of-the-art air conditioning system designed to provide efficient cooling and heating for your home. This model boasts a sleek design, making it an attractive addition to any living space. With its advanced features and powerful performance, the IAS5000RQ2 is tailored for comfort, convenience, and energy efficiency.

One of the standout features of the IAS5000RQ2 is its powerful cooling and heating capabilities. With a cooling capacity of up to 14,000 BTUs and heating capacity of around 13,000 BTUs, this unit can effectively regulate the temperature in medium to large-sized rooms. Its ability to switch between cooling and heating modes allows for year-round comfort, catering to diverse climate needs.

The unit incorporates Whirlpool’s innovative inverter technology, which optimizes energy consumption while maintaining consistent temperature levels. This feature significantly reduces energy bills compared to traditional units, providing a more environmentally friendly cooling and heating solution. By adjusting the compressor speed based on the temperature requirements, the inverter technology ensures efficient operation and minimal energy wastage.

Another notable characteristic is the Quiet Operation feature that minimizes noise levels, making it suitable for bedrooms, home offices, and other areas where tranquility is desired. With sound levels as low as 42 dB, users can enjoy a peaceful environment while the unit operates effectively.

The Whirlpool IAS5000RQ2 also prioritizes user control and convenience with its intuitive digital thermostat and remote control capabilities. Homeowners can easily set their desired temperature, adjust fan speeds, and switch modes without having to leave the comfort of their couch. Additionally, the 24-hour programmable timer allows users to automate their cooling and heating schedules, further enhancing energy efficiency.

Furthermore, this model features an advanced air filtration system that captures dust and allergens, creating a healthier indoor air environment. The filter is easy to access and clean, ensuring optimal performance and longevity.

In summary, the Whirlpool IAS5000RQ2 is a sophisticated air conditioning solution that seamlessly combines powerful performance, energy efficiency, and user-friendly features. With its inverter technology, quiet operation, and advanced filtration, this unit is ideal for those looking to enhance their home’s climate comfort while keeping energy consumption in check.