TTKE~P~~SIBLE |
|
| cAusE | |
Washer fills | and | Cycle control | knob is not pointing | |
drains | without | to a number | in the cycle. | |
running |
|
|
| |
Washer drains | Drain hose is lower than the | |||
during | wash | and | water level in the washer. | |
rinse | cycles, | or |
|
|
water | siphons out |
|
|
2.If your problem is not due
to one of the items listed in Step 1 . ..
Contact the dealer from whom you purchased the unit or an authorized Whirlpool service company.
3.If you need FSP’ replace- ment parts . ..
FSP is a protected trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a replacement part for your Whirlpool appliance. FSP replacement parts will fit right and work right, because they are made to the same exacting specifications used to build every new Whirlpool appliance. To locate FSP replacement parts in your area, contact the dealer from whom you purchased the unit or an authorized Whirlpool service company.
SOLUTION
Set cycle control knob on correct number in the cycle.
Adjust drain hose so that it is higher than the water level in the washer.
Gearcase assembly covered
by your warranty u li9
22