OPERATING YOUR WASHER
Understanding what happens in each cycle
When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.
After agitation starts, the Cycle Control Knob turns clockwise until it points to an OFF area and the cycle ends.
NOTE: The washer pauses briefly through- out each cycle. These pauses are normal for washer operation.
WASH
Fill
▼
Wash selected time
▼
Drain*
No agitation
▼
*The Permanent Press cycle partially drains, fills, agitates briefly, and drains.
Spin
▼
RINSE
Fill
▼
Rinse
▼
Drain – No agitation
▼
▼
Spin
▼
Off
Self-cleaning lint filter
The lint filter at the bottom of the washer |
|
|
basket cleans itself. During agitation, wash |
|
|
and rinse water pass over the filter, separat- |
|
|
ing the lint from the water. The lint is then |
|
|
spun away from the filter and out of the |
|
|
system during the spin part of the cycle. |
|
|
If your washer drains into a tub, remove | Basket | |
any lint collected in the tub or strainer. | ||
| lint filter | interior |
9