Whirlpool 3389591 installation instructions Product dimensions, Panel G

Page 8

Recessed and closet installation instructions

Fire Hazard

l It is recommended that the dryer be exhausted outside

l If washer/dryer is installed in a closet, the dryer MUST be exhausted outside.

Failure to do so may cause a fire.

This washer/dryer may be installed in a recessed area or closet.

The installation spacing is in inches and is minimum allowable. Additional spacing should be considered for ease of installation, servicing and compliance with local codes and ordinances.

If closet door is installed, the minimum unobstructed air openings in top and bottom are required. Louvered doors with equivalent air openings are

acceptable. Closet installation must be exhausted.

Other installations must use the minimum dimensions indicated.

TO PREVENT LARGE AMOUNTS OF LINT AND MOISTURE FROM ACCUMULATING, TO MAINTAIN DRYING EFFICIENCY, THIS APPLIANCE SHOULD BE EXHAUSTED OUTDOORS.

Recessed area minimum installation spacing

a- 3”

 

Washer

•II .

J

Side View

Front View

Recessed, non-exhausted installation must use only the rear exhaust position and Exhaust Deflector Part No. 694609.

Note: If recessed installation is exhausted to the side or rear, 6 inches must be available above the washer/dryer but all other spacing can be 0 inches.

Closet installation must be exhausted outdoors.

Closet Door

/4

f6”

48. sq. in. +*

4

1” min.+

24. sq. in. l *

Side View

Closet Door

sq. in. l *

sq. in. l *

4

Front View

*Additional clearances for wall, door and floor moldings may be required or if external exhaust elbow is used.

**Opening is minimum for closet door, Louvered door with equivalent air openings is acceptable.

***$MiEnal space may be needed for exhaust

Product dimensions

1+26-l/4’ +I

+27-3/a” -

-i

Panel G

Image 8
Contents Important Read and save these instructions Tools and materials needed for installation Before you startRequhements Panel aPanel B Mobile home installationExhaust reaufrements Now start With washer/dryer in laundry areaNumbers Correspond to steps Panel CIII Panel DWhen local codes When local codes Local CodesAlternate electrical Connection Panel EWhen local codes To connect a separate grounding wireTo remove Power Supply Cord Direct wiring connectionProduct dimensions Panel GWhen moving the washer/dryer If you need serviceIf washer/dryer does not operate properly If you need Assistance

3389591 specifications

The Whirlpool 3389591 is a versatile and essential component for those seeking to maintain or enhance their home appliance experience. Specifically designed for use in various Whirlpool dryers, this temperature sensor plays a crucial role in ensuring optimal operation. One of its primary functions is to regulate the dryer’s temperature, ensuring that clothes are dried efficiently while preventing overheating, which can lead to damage or fire hazards.

One of the main features of the Whirlpool 3389591 is its compatibility. It is designed to work seamlessly with multiple models, making it a go-to replacement part for numerous Whirlpool dryer users. This versatility addresses the common challenge of finding the right part for specific appliance models, providing a reliable solution for maintenance needs. Additionally, the sensor is engineered for easy installation, allowing homeowners to replace it without requiring extensive technical knowledge or specialized tools. This user-friendly feature is a significant advantage for those who prefer DIY repairs.

In terms of technology, the Whirlpool 3389591 utilizes advanced thermal sensing capabilities. It is designed to provide precise temperature readings, crucial for effective moisture removal from clothing during drying cycles. This technology not only enhances the efficiency of the drying process but also contributes to energy savings. By maintaining an appropriate temperature, the sensor ensures that the dryer operates within its optimal range, ultimately prolonging the lifespan of the appliance.

Furthermore, the characteristics of the Whirlpool 3389591 highlight its durability and reliability. Constructed with high-quality materials, this temperature sensor is built to withstand the rigors of regular use. Its robustness ensures that it can function well under various operating conditions, making it a dependable choice for long-term use.

Overall, the Whirlpool 3389591 temperature sensor is a critical component that enhances the performance of Whirlpool dryers. With its compatibility, ease of installation, advanced technology, and durable construction, it represents a smart investment for homeowners looking to ensure their appliances operate efficiently and safely. By keeping an eye on such essential parts, users can enjoy a more reliable and effective drying experience in their laundry routines.