Caring for Your
Washer/Dryer
Proper care of your washer/dryer can extend its life. This section explains how to care for your washer/dryer properly and safely.
Every load cleaning - washer
Cleaning the lint filter
Clean the filter at the bottom of the agitator after every load for the best filtering results. To clean:
1.Lii off the agitator barrel.
2.Wash or wipe the filter clean in the bottom of the agitator barrel. The filter is not removable.
3.Replace agitator barrel. Snap it into place.
Every load cleaning - dryer
Cleaning the lint screen
The lint Screen is located inside the dryer drum, on the back wall. Clean lt before each bad. A screen Mocked by lint can increase drying time.
1.Open the door and pull the lint screen straight out.
2.Squeeze the lint screen lightfj while pulling the cover off.
3.Roll lint off the screen with your fingers. Do not rinse or wash the screen to remove lint. Wet lint is hard to remove.
4.Replace cover on lint screen. Push the lint screen firmly back into place and cbse the door.
IMPORTANT:
lDo not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and damage to both the dryer and fabrics.
l Some towels made of synthetic fibers and natural fibers (polyester and cotton blends) may shed more lint than other towels, causing your dryer’s lint screen to fill up faster. Be sure to remove lint from the lint Screen before and after drying new towels.
25