Removing accumulated lint from tha dryer
Lint can gather insida the dryer and be a fuel for fire. Lint should be removed every 2 to 3 years, or more often, depending on dryer usage. Cleaning should be done by a qualified person. lf you have any questions or comments, please call our Consumer Assistance Center at
Electrkd Shock, Personal InJury, and Product Damage Hazard
mUnplug the power supply cord or turn off the elect&al power before removing dryer panels.
@Makesure the dryer is cool.
a Dryer parts can have sharp edges. Usa care whan handling.
*More than one person is required to Iii, tit& or move machine because of its weight and size.
aTruck unly from mar.
Failure to follow the above instn&.ions could result in electrical shock, per-
.sonal injury, or product damage.
1.tJnplugthepowarsuppiycxxlortumoff the elactrical power.
2.Remove back panel. See Installation hx&Jctions.
3.Remove lint from shaded area in ilbstra- tbn with a soft brush or vacuum cleaner. Avoid damaging wires, themats,
funnei I(w), or igw @a
4.Replace penel; reconnect and level dryer again, if necasaary.
Hestinletl Thermoetata Motor duct
Electric dryer with back panel removed
27