JVC KD-S811R manual Setting the TA volume level, Automatic clock adjustment

Page 13

To activate programme search, follow the procedure below.

•Programme search takes a while.

•See also “Changing the general settings (PSM)” on page 19.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “P(Programme)-SEARCH.”

3 Rotate the control dial clockwise to select “ON.” Now programme search is activated.

To cancel programme search, repeat the same procedure and select “OFF” in step 3 by rotating the control dial counterclockwise.

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

•See also “Changing the general settings (PSM)” on page 19.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “TA VOL.”

3 Rotate the control dial to set to the desired volume.

You can set it from “VOL 00” to “VOL 50.”

ENGLISH

Changing the display mode while listening to an FM station

You can change the initial indication on the display to station name (PS NAME), station frequency (FREQ) or Clock time (CLOCK) while listening to an FM RDS station.

•See also “Changing the general settings (PSM)” on page 19.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “DISPMODE” (display mode).

3 Rotate the control dial to set to the desired indication (“PS NAME”, “FREQ” or "CLOCK").

Note:

By pressing DISP, you can also change the display while listening to an FM RDS station.

Each time you press the button, the following information appears on the display:

Station name

 

 

 

Station frequency

(PS NAME)

 

 

 

(FREQ)

CLOCK

 

 

 

Programme type

(Clock time)

 

 

 

(PTY)

•Then, the display goes back to the original indication in several seconds.

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 19.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2 Press ¢ or 4 to select “AUTO ADJ.”

3Rotate the control dial counterclockwise to select “OFF.”

Now automatic clock adjustment is canceled.

To reactivate clock adjustment, repeat the same procedure and select “ON” in step 3 by rotating the control dial clockwise.

Note:

It takes about 2 minutes to adjust the time using the CT data. So, you should not change the station for more than 2 minutes continuously; otherwise, the clock time will not be adjusted.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents KD-S811R/KD-S713R KD-S711R Position And Reproduction Of Labels How to reset your unitContents Control panel Location of the ButtonsDisplay window Display windowTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio Basic OperationsSearching a station automatically Auto search Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Manual preset Tuning into a preset stationSelect the number 1 6 for the preset station you want Tune into a station of 88.3 MHzMode RDS OperationsPTY Standby Reception Using Standby ReceptionTA Standby Reception Selecting your favorite programme for PTY Standby ReceptionSearching your favorite programme Finish the settingTo store your favorite programme types PTY codesOther convenient RDS functions and adjustments Automatic clock adjustment Setting the TA volume levelChanging the display mode while listening to an FM station Playing a CD CD OperationsTo stop play and eject the CD Insert a disc into the loading slotTo go to the next tracks or the previous tracks To fast-forward or reverse the trackTo go to a particular track directly To play back tracks at random Random PlayProhibiting CD ejection To cancel the prohibition and unlock the CDPress and hold CD and 0for more than 2 seconds Adjusting the sound Sound AdjustmentsSelecting and storing the sound modes To reset to the factory settings Storing your own sound adjustmentsRecalling the sound modes Changing the general settings PSM Setting the clockBasic Procedure Other Main Functions24H/12H Preferred Setting Mode PSM itemsTo select the telephone muting TEL To cancel Advanced SCM SCM LinkTo select the level meter Level Attaching the control panel Detaching the control panelInstalling the battery Remote ControllerRemove the battery holder Place the batteryUsing the remote controller Symptoms Causes Remedies TroubleshootingHandling CDs MaintenanceMW Tuner SpecificationsLW Tuner FM TunerHaving Trouble with operation? KD-S811R KD-S713R KD-S711R Die Griffe nach dem Einbau auf jeden Fall aufbewahren Removing the unitBe sure to ground this unit to the car’s chassis To 8 ΩHinweis Sicherstellen, daß das Gerä t am Fahrwerk geerdet wirdThis unit, place this unit Under To prevent internal heat buildup insideOther equipment Zur Vermeidung eines Hitzestaus

KD-S811R specifications

The JVC KD-S811R is a versatile car stereo receiver designed to enhance your in-car entertainment experience. This model stands out with its blend of advanced audio technologies and an array of user-friendly features, making it a top choice for music lovers.

One of the main features of the KD-S811R is its support for multiple audio formats. The receiver is compatible with CD, CD-R, and CD-RW formats, allowing you to enjoy a wide selection of music. Furthermore, it supports MP3 and WMA playback, meaning you can easily listen to your favorite tracks stored on digital media.

In terms of sound quality, the KD-S811R boasts a built-in five-band equalizer. This allows users to customize their audio experience by adjusting frequency settings to suit their preferences. With its powerful built-in amplifier, the receiver delivers clear and dynamic sound, ensuring that every note is crisp and every beat is felt.

The JVC KD-S811R also includes a front USB port, enabling easy connection to flash drives and other USB audio sources. This feature offers the convenience of direct playback from a variety of media, making it easy to access your music library on the go. Additionally, the inclusion of a 3.5mm AUX input allows for even more flexibility, accommodating devices such as smartphones and portable music players.

Another noteworthy characteristic of the KD-S811R is its radio capabilities. It features a built-in FM/AM tuner that enables you to listen to your favorite radio stations. With 18 FM and 6 AM presets, you can easily save your preferred stations for quick access.

The ease of use is further enhanced by the receiver's user interface. The large, easy-to-read display provides clear visibility of track information and settings, even in low-light conditions. The control layout is intuitive, making it accessible for users of all experience levels.

Connectivity options are also robust, as the KD-S811R is ready for integration with additional audio devices. Its compatibility with various Bluetooth adapters facilitates hands-free calling and wireless music streaming, allowing you to enjoy your favorite playlists without fuss.

In summary, the JVC KD-S811R is a feature-rich car stereo receiver that combines modern technology with excellent sound quality. Its compatibility with multiple audio formats, customizable equalizer settings, and user-friendly controls make it a great addition to any vehicle, enhancing every journey with high-quality sound and functionality. Whether you are a casual listener or an audio enthusiast, the KD-S811R is designed to satisfy your needs on the road.
Top Page Image Contents