JVC KD-S811R manual RDS Operations, Mode

Page 9

RDS OPERATIONS

What you can do with RDS EON

RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.

Another advantage of RDS function is called “EON (Enhanced Other Networks).” The EON indicator lights up while receiving an FM station with the EON data. By using the EON data sent from a station, you can tune into a different station of a different network broadcasting your favorite programme or traffic announcement while listening to another programme or to another source such as CD.

By receiving the RDS data, this unit can do the following:

•Tracing the same programme automatically (Network-Tracking Reception)

•Standby Reception of TA (Traffic Announcement) or your favorite programme

•PTY (Programme Type) search

•Programme search

•And some other functions

To use Network-Tracking Reception, press and hold TP RDS (Traffic Programme/Radio Data System) for more than 1 second. Each time you press and hold the button, Network-Tracking Reception modes change as follows:

Mode 1 Mode 2 Mode 3

AF indicator

 

 

 

REG indicator

 

 

 

 

 

 

 

Mode 1

The AF indicator lights up but the REG indicator does not.

Network-Tracking Reception is activated with Regionalization set to “off.”

Switches to another station within the same network when the receiving signals from the current station become weak.

•In this mode, the programme may differ from the one currently received.

ENGLISH

Tracing the same programme automatically (Network-Tracking Reception)

When driving in an area where FM reception is not good, the tuner built in this unit automatically tunes into another RDS station, broadcasting the same programme with stronger signals. So, you can continue to listen to the same programme in its finest reception, no matter where you drive. (See the illustration on the next page.)

Two types of the RDS data are used to make Network-Tracking Reception work correctly — PI (Programme Identification) and AF (Alternative Frequency.)

Without receiving these data correctly from the RDS station you are listening to, Network-Tracking Reception will not operate.

Mode 2

Both the AF indicator and the REG indicator light up.

Network-Tracking Reception is activated with Regionalization set to “on.”

Switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak.

Mode 3

Neither the AF indicator nor the REG indicator lights up.

Network-Tracking Reception is deactivated.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents KD-S811R/KD-S713R KD-S711R Position And Reproduction Of Labels How to reset your unitContents Control panel Location of the ButtonsDisplay window Display windowTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio Basic OperationsSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM When an FM stereo broadcast is hard to receiveStoring stations in memory Manual preset Tuning into a preset stationSelect the number 1 6 for the preset station you want Tune into a station of 88.3 MHzMode RDS OperationsPTY Standby Reception Using Standby ReceptionTA Standby Reception Selecting your favorite programme for PTY Standby ReceptionSearching your favorite programme Finish the settingTo store your favorite programme types PTY codesOther convenient RDS functions and adjustments Setting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station Playing a CD CD OperationsTo stop play and eject the CD Insert a disc into the loading slotTo go to the next tracks or the previous tracks To fast-forward or reverse the trackTo go to a particular track directly To play back tracks at random Random PlayTo cancel the prohibition and unlock the CD Prohibiting CD ejectionPress and hold CD and 0for more than 2 seconds Sound Adjustments Adjusting the soundSelecting and storing the sound modes Storing your own sound adjustments To reset to the factory settingsRecalling the sound modes Changing the general settings PSM Setting the clockBasic Procedure Other Main Functions24H/12H Preferred Setting Mode PSM itemsTo cancel Advanced SCM SCM Link To select the telephone muting TELTo select the level meter Level Attaching the control panel Detaching the control panelInstalling the battery Remote ControllerRemove the battery holder Place the batteryUsing the remote controller Symptoms Causes Remedies TroubleshootingHandling CDs MaintenanceMW Tuner SpecificationsLW Tuner FM TunerHaving Trouble with operation? KD-S811R KD-S713R KD-S711R Die Griffe nach dem Einbau auf jeden Fall aufbewahren Removing the unitBe sure to ground this unit to the car’s chassis To 8 ΩHinweis Sicherstellen, daß das Gerä t am Fahrwerk geerdet wirdThis unit, place this unit Under To prevent internal heat buildup insideOther equipment Zur Vermeidung eines Hitzestaus

KD-S811R specifications

The JVC KD-S811R is a versatile car stereo receiver designed to enhance your in-car entertainment experience. This model stands out with its blend of advanced audio technologies and an array of user-friendly features, making it a top choice for music lovers.

One of the main features of the KD-S811R is its support for multiple audio formats. The receiver is compatible with CD, CD-R, and CD-RW formats, allowing you to enjoy a wide selection of music. Furthermore, it supports MP3 and WMA playback, meaning you can easily listen to your favorite tracks stored on digital media.

In terms of sound quality, the KD-S811R boasts a built-in five-band equalizer. This allows users to customize their audio experience by adjusting frequency settings to suit their preferences. With its powerful built-in amplifier, the receiver delivers clear and dynamic sound, ensuring that every note is crisp and every beat is felt.

The JVC KD-S811R also includes a front USB port, enabling easy connection to flash drives and other USB audio sources. This feature offers the convenience of direct playback from a variety of media, making it easy to access your music library on the go. Additionally, the inclusion of a 3.5mm AUX input allows for even more flexibility, accommodating devices such as smartphones and portable music players.

Another noteworthy characteristic of the KD-S811R is its radio capabilities. It features a built-in FM/AM tuner that enables you to listen to your favorite radio stations. With 18 FM and 6 AM presets, you can easily save your preferred stations for quick access.

The ease of use is further enhanced by the receiver's user interface. The large, easy-to-read display provides clear visibility of track information and settings, even in low-light conditions. The control layout is intuitive, making it accessible for users of all experience levels.

Connectivity options are also robust, as the KD-S811R is ready for integration with additional audio devices. Its compatibility with various Bluetooth adapters facilitates hands-free calling and wireless music streaming, allowing you to enjoy your favorite playlists without fuss.

In summary, the JVC KD-S811R is a feature-rich car stereo receiver that combines modern technology with excellent sound quality. Its compatibility with multiple audio formats, customizable equalizer settings, and user-friendly controls make it a great addition to any vehicle, enhancing every journey with high-quality sound and functionality. Whether you are a casual listener or an audio enthusiast, the KD-S811R is designed to satisfy your needs on the road.
Top Page Image Contents