Haier XQG60-HA800TX(M), XQG60-HA1000TX(M) manual Cycle is started, Wash is finished

Page 14

Using instructions:Your machine

offers the best results when...

The cycle is started

You can now start washing. We would advise you, especially the first few times, to check that the programme that you have set is really the one you want and that the fabric selection is correct.

If you want to start the cycle immediately, press the ON/OFF button D.

The wash is finished

At the end of the chosen cycie, the machine will stop automatically.

Press the ON/OFF button D to switch off the power (light C will turn off).

13

Image 14
Contents Automatic Drum Washing Machine XQG60-HA800TXM XQG60-HA1000TXM11-15 17-18Function Introduction Installation Unpacking levelling and positioningElectric connection Connection of tap and Loading HoseConnecting WaterSupply Close up F1 HMAX 500 Door Lock ButtonBeen loaded Weight is rightLaundry has CorrectlyBeen chosen CorrectProgramme has Detergent has been put in properly Never place bleach in the other compartments Cycle is started Wash is finishedMaintenance five simple precautions for this machine There is too much foam in the tub Solution to ProblemsWashing machine wont start Machine vibrates too much when spinning Machine Check thatGuide for selecting programme Page Wiring Circiut XQG60-HA1000TXM Wiring CIRCIUTXQG60-HA800TXM